bork 0 #1 Posted January 15, 2010 Is it good to put a drop of oil on pivot points (like linkage & pins etc...) or does this attract dust & accelerate wear? Share this post Link to post Share on other sites
Sparky-(Admin) 21,300 #2 Posted January 15, 2010 I'm thinkin that no lube at all would cause the most wear. I would definitly put a dab of grease on the pivot points. Mike..... Share this post Link to post Share on other sites
Sarge 3,463 #3 Posted January 16, 2010 Look for a graphite based lube from Farm or Truck suppliers called "Slip-Plate". Available either in spray cans or liquid quarts/pints. Goes on like paint and creates a very slick wear surface that lasts quite awhile. Just don't paint things you want clean, it can be messy. Sarge Share this post Link to post Share on other sites
rickv1957 72 #4 Posted January 16, 2010 A little lube wont hurt a thing,use it myself also,Rick Share this post Link to post Share on other sites
JimD 3,345 #5 Posted January 16, 2010 A little lube wont hurt a thing,use it myself also,Rick :thumbs: Share this post Link to post Share on other sites
bitten 134 #6 Posted January 16, 2010 :thumbs: It cant hurt your pivot points. Share this post Link to post Share on other sites
Save Old Iron 1,566 #7 Posted January 16, 2010 A little lube wont hurt a thing,use it myself also,Rick Rick, you are a wild man !! Share this post Link to post Share on other sites
whfan74 2,066 #8 Posted January 16, 2010 :thumbs: On a more serious note..........use it here and am happy with the results! Share this post Link to post Share on other sites
stevasaurus 22,698 #9 Posted January 16, 2010 :thumbs: Share this post Link to post Share on other sites
