loyd 0 #1 Posted January 10, 2010 hello all i have a gt1600 workhores a 105 i think can not find the #AND A. C-81.ALL WITH 8 SPEED . DOES THE 105 AND C-81 USED THE SAME DRIVE BELT. I JUST WANT TO SAY I READ REDSQUARE EVERYDAY AND LOVE WHEEL HORSES BUT YOU DON.T FIND MANY IN NORTH WEST N.C. EXCUSE THE TYPING .THANK YOU ALL Share this post Link to post Share on other sites
rickv1957 72 #2 Posted January 10, 2010 Hello and Rick Share this post Link to post Share on other sites
jusjeepn 59 #3 Posted January 10, 2010 :banghead: ! :thumbs: Share this post Link to post Share on other sites
marvairplanes 34 #4 Posted January 10, 2010 COOL !!! Marv Share this post Link to post Share on other sites
Michael Bullington 5 #5 Posted January 10, 2010 :thumbs: Share this post Link to post Share on other sites
Raider12puller 1 #6 Posted January 10, 2010 DOES THE 105 AND C-81 USED THE SAME DRIVE BELT. I believe that they do us the same belt. Was cruising around the toro site and found that both the C81 and C105 where both made in 1981 which helps me believe they are the same Believe that the number you are looking for is 7473(v belt) or 107939 (drive belt) Hopefully someone else and help you figure out what number is correct. Hope this helps 01-10K802 1981 C-105 8-Speed Tractor 01-10K803 1982 C-105 8-speed tractor Share this post Link to post Share on other sites
Sparky-(Admin) 21,405 #7 Posted January 10, 2010 They both use the same drive belt. #7473 Mike....... :thumbs: Share this post Link to post Share on other sites
rocking 416 1 #8 Posted January 10, 2010 I own two c 81's 1978 and 1979 There good little work horses. Here is one being a tow truck Share this post Link to post Share on other sites
loyd 0 #9 Posted January 10, 2010 thanks you all .you all have been a lot of help for people who have wheel horses.hope i can learn to post pictures on here of my three.i have a blade i use on the 105 and a 8" plow for c-81 have you all plowed with a c-81 before. i use the gt-1600 work horse to mow with. Share this post Link to post Share on other sites
rocking 416 1 #10 Posted January 10, 2010 This is my 1978 C81 geting rewired. The tow truck is a 1979 Share this post Link to post Share on other sites
rocking 416 1 #11 Posted January 10, 2010 Ive plowed with my C81 8 inch brinly its kinda hard to lift it out of the dirt tho So i mainly use a york rake with it to rake the drive way i dont need to lift it as much. But a Weighted C81 is a strong machine Just rember to put some front weight on her cuz it will buck up lol Share this post Link to post Share on other sites
loyd 0 #12 Posted January 11, 2010 this is loyd again. i wonder if you could put front weight on the mule drive some way Share this post Link to post Share on other sites
can whlvr 993 #14 Posted January 11, 2010 :thumbs: and u could put weight there or in the tires or wheelweights Share this post Link to post Share on other sites
rocking 416 1 #15 Posted January 11, 2010 I wanna make a weight bar for myn. but all i have are john deere suit case weights. i wonder where i can buy 50lbs plain red suit case weights or black an i paint them red. C81 is a good work horse tho but no weight on the front an your plowing an have weight on the rear It can be diffcult to turn it Share this post Link to post Share on other sites
KeithB 6 #16 Posted January 20, 2010 Welcome to Red Square :thumbs: Share this post Link to post Share on other sites
