rebuild kits

[Indy w h 5]

Ok then, now that the whole pump thing is cleared up I still have kits available!!

For the RS members that did buy the kits I thank you!!! For those of you who need

the kits but are a little Leary, I understand. But it's all behind me now. So again I can

re-seal your pump plus any gasket you need and also the pressure ball.

Thanks again

for the ones that bought my kits I thank you again

Indy

I almost frogot I carry the 1054-1054a type spring also

[rickv1957 72]

Indy,I still need a kit,Rick

[big mike 13]

I was interested to read this thread because of the springs but from looking at the parts break downs these pumps use a different spring than the ones in the Cub Cadet pumps.The Cub springs are coiled with two tabs or ears that fit over pins pressed into the pump housing.

[Indy w h 5]

Big mike, the 1054-1054a h-w pump is the same on the cubs.

The springs that I have will fit the cub pumps. I have sold kits to

cub cadet owners and had no problems with the kits or springs

thanks Indy

[rickv1957 72]

Indy,your working on being the HY2-3 Pro,Rick :notworthy:

[Indy w h 5]

I wouldn't say "I'm the pro" Rick, just the fact that I've rebuilt quite a few of these pumps !!just

got the hy's mixed up a little but it's all good now I'm back on track to help everybody out that needs a little pump help!!! Hope I can get yours in the mail soon!! Thanks again for the order!!

Indy

[Lane Ranger 10,943]

Here is a link to some additional information on these Hyraulic Pumps:

[jschultz 0]

I'm thinking about being a vendor for the hy-2 & 3 pumps I guess the question

is does anybody on RS need kits for there pumps???? If I get a lot of feedback

on this I can get you a complete overhaul kit without the springs for the hy-2.

Or with the spring on the hy-3's. Let me know!!! Thanks for reading this

Indy

hello indy im new to the site i have a 1962 or 63? wheel horse 953 and i have been looking for years to find a way to find parts or a rebuild kit for my hydrolic pump i only need the bushings and gears or a whole kit anything to get it working again thanks!