310-8 Freshen Up - Pics

[rickv1957 72]

Steve,the tractor turned out great,nice work!,Rick :notworthy:

[Indy w h 5]

WOW!!!!!!Great job!!

Indy

[stevebo-(Moderator) 8,362]

Well, after the rear end problems I decided to pull the ranny and replace it with the one from my C105-8. Now I need a tranny for my C105 I have a line on a C111 can anyone tell me if that has the 1 inch or 1 1/8 inch tranny? Here are the pics of the tractor less the decals which should be here tomorrow according to Terry. Here she is with the 37 inch deck and bagger.

[Duff 206]

Man, Stve Bo, that is one FINE looking machine!!!!!

Duff :WRS:

[stevebo-(Moderator) 8,362]

Thanks Duff !! I hope it is one fine looking machine with a new owner soon. :notworthy:

[d180man 5]

Hi very nice job !! :WRS:

[can whlvr 993]

not real sure about the c111 but my c101 has the bigger axles and 8 pinion,so i would asume the 111 has it but the brigs motor,hopefully someone will chime in with the real facts

[can whlvr 993]

checked parts tree ana the 111 has the 1and an eigth axle.

[stevebo-(Moderator) 8,362]

Got the decals today from Terry-thanks!! Have to say he is a great guy to deal with and follows through. Heated up the shop and got the decals installed. Here are a few finished pics of this machine. Hopefully is will be sold on Saturday !! Guy is coming 8am with cash and a trailer. I have to say that I will not be too disapointed if he does not take it. My price will be pretty firm on this one. Have to start on the 314-8 ...

[truckin88 104]

Steve really nice job, does the 105 rear have 1 1/8" axles, if so that guy got a nice upgrade and that 310 is a beast. what year was it, as that was a K and not a magnum?

[stevebo-(Moderator) 8,362]

Will, yes the C105 has the 1 1/8 inch axles so he did get an upgrade. It is about a 85 or 86 I would imagine but could not comfirm (no numbers after sandblasting) It has the K series 10hp with only 329 hours !! It came out nice but the sandblasting left some indentations in the metal and I did not use a high build primer. Something to consider on the next one.

[truckin88 104]

this is one of your best yet! did it sell?

[stevebo-(Moderator) 8,362]

I will know in the morning (Saturday). Guy is coming over at 8am.

[TJ 176]

Nice job. :notworthy:

[stevebo-(Moderator) 8,362]

Guys,

Hated to see it go but is sold today !! It was so cold out that the darn choke cable froze and had to disconnect it then explain to the buyer why it happened It is easier when the buy actually knows how things work but this buyer does not. It was a good thing that he brought a friend that has some mechanical ability.

I sold it for my full asking price.

Next up is the 314 !!

[fireman 1,022]

Nice sale Now if you can do that with the other one you`ll be set for further Wheel Horse spending!

[truckin88 104]

314 going or staying???

[stevebo-(Moderator) 8,362]

see my other post

[Stigian 1,234]

Nice work there Steve, shame you sold it but I guess we can keep em all..

[stevebo-(Moderator) 8,362]

Ian,

I was up to 13 and had to recoop some $$ to pay for the other projects. I got the 314 fired up last night and it sounds awesome !! The sheetmetal is done at the sandblasters which I will pick up today. I will post pics of that later. Thanks-

[Ken B 3,164]

You sure are rockin and rollin! Be careful not too burn yourself out! Been there and done that. Can't wait to see the pics.

[rickv1957 72]

Steve your tractor looks very nice,Terrys decals are great too,Rick :notworthy: