gattonde 1 #51 Posted December 17, 2009 Looks good Steve, now you (are your daughter) can get ready for the snow. LOL Dan Share this post Link to post Share on other sites
Indy w h 5 #52 Posted December 18, 2009 Glad to have helped ya!!!!!!! Share this post Link to post Share on other sites
Suburban 550 28 #53 Posted December 18, 2009 Way to go, Steve. I knew you could do it. :notworthy: Share this post Link to post Share on other sites
Lane Ranger 10,968 #54 Posted December 18, 2009 Steve: You have done a very good job here of providing a great tutorial on HOW TO DO these hydraulic pump rebuilds. I am ready to tear into one of old unused 1054 hyraulic pumps we have in my dad's parts shed. Thank you for taking the time to share this and provide the details on your progress and process! This is what makes Red Square a tremendous resource for we old Wheel Horse fans! :notworthy: Share this post Link to post Share on other sites
rickv1957 72 #55 Posted December 18, 2009 I am ready to rebuild my pump as soon as Indy gets a kit ready for me!,Rick Share this post Link to post Share on other sites
linen beige 14 #56 Posted December 18, 2009 Hey Steve, Wait till you start playing with the blade in some dirt. The down pressure from this lift turns these little 702s into mini-dozers! You'll be looking for things to dig up. Share this post Link to post Share on other sites
stevasaurus 22,717 #57 Posted December 18, 2009 Thanks for the nice comments guys...I had a great time doing this and had good people behind me. Lane you are right, this is a special place. I even got Linen (Jim) to type "hooby dooby". How great is that? :notworthy: Share this post Link to post Share on other sites
linen beige 14 #58 Posted December 19, 2009 I even got Linen (Jim) to type "hooby dooby". How great is that? Yea? But I had to do it twice to get the spelling right. :notworthy: Share this post Link to post Share on other sites
Pullstart 62,834 #59 Posted August 22, 2019 @stevasaurus I found this thread and am thinking I’ll put it to good use! After a day of plowing, the lift doesn’t like the weight of my plow. If I help lift it, it’ll hold it up... but doesn't want to lift by itself. I bet it’s lived long enough and can use a little freshening up Share this post Link to post Share on other sites
stevasaurus 22,717 #60 Posted August 22, 2019 @pullstart Kevin, if the lift stays up by itself, you are probably just low on fluid. If it bleeds down, and it may in the long run anyway, then it could be the washers in the cylinder. The hydraulics in the HY-2 are a push / pull in the cylinder. That is, the cylinder is always full of fluid, the piston is just pushed from one end or the other. Try adding about 1 cp of fluid and see if it is OK after that. Lane Ranger was selling seals and such if you need parts. Lowell may have them also now. 1 Share this post Link to post Share on other sites
Pullstart 62,834 #61 Posted August 22, 2019 I’ll run a dipstick in and see if it’s low. No whining or anything... and I tried to add fluid but possibly it didn’t have an adequate way to burp the air out. 1 Share this post Link to post Share on other sites
Tractorhead 9,064 #62 Posted August 22, 2019 (edited) The air in hydraulics bleeded normally itself by hydraulic is moved from end to end. may it depends few movements more to bleed completely By the way, if you bleeded the Hydraulics, the air will be bound in Hydraulicfluid, depending on viscosity it can happen few minute to release the Air out of Fluid. The bleeding happend to fillercap normally. Edited August 22, 2019 by Tractorhead Added text. Share this post Link to post Share on other sites
