Prater 75 #26 Posted November 23, 2009 OK, I did not count them. I see that it whould have 7 actual louvers. The ones on my D180 are bent stainless. Share this post Link to post Share on other sites
Prater 75 #27 Posted November 23, 2009 Anyone have a wiring diagram for the D series? Share this post Link to post Share on other sites
tgranthamfd 28 #28 Posted November 23, 2009 Anyone have a wiring diagram for the D series? You should be able to download th demastifcation guide off of Toro's sight. I think someone gave your dad the instructions on his C-111 post. Share this post Link to post Share on other sites
Prater 75 #29 Posted November 23, 2009 Terry, They did not have the wiring diagram on that page. I just went ahead and ordered the user manual and parts manual from them. Share this post Link to post Share on other sites
defed 0 #30 Posted November 23, 2009 i think the rear pto is 2000rpm. you can just barely see the grill of one in rick's signature photo. i also thought that they were window blinds on yours! Share this post Link to post Share on other sites
linen beige 14 #31 Posted November 24, 2009 The three point on my D-160 didn't want to work when I first got it. One of the O rings in the valve body had disintegrated and there was a chunk of stray rubber semi clogging the valve. It still won't go down very easily, but I haven't taken the time to look into it. Your grill slats should be flat front, with a section running 90 degs to the slats. Sort of like angle iron with one narrow side, if that makes sense. Share this post Link to post Share on other sites
rickv1957 71 #32 Posted November 24, 2009 Steve,yes the pto is 2000,you will need a grill as that is not original,if I can help let me know,Rick Share this post Link to post Share on other sites
Prater 75 #33 Posted November 24, 2009 I should have it home in a week or so. I have to make room. The PO changed the fluid filter so i will take oer from there... Share this post Link to post Share on other sites
pond195520032003 27 #34 Posted November 24, 2009 Steve, if rick cant help you out i possibly can yea, the D's are cool we have an 1- 18 automatic, 1-D-180, 1-D-180 parts tractor, 2 D-200's, 1-D-250, and 2-D-160 carcus'es(spelling) have grills, body panels, a couple frames, etc. Share this post Link to post Share on other sites
rickv1957 71 #35 Posted November 25, 2009 Steve,glad to see your in the D club,Rick Share this post Link to post Share on other sites
Prater 75 #36 Posted November 27, 2009 Everbody can now relax, Rick has a grille for me...It will ship to me after I get my tranny apart for the puller project just in case he needs to add some parts to the box. Share this post Link to post Share on other sites