tranders 0 #1 Posted September 24, 2009 If using an automotive tach on a K181 would I need to double or cut in half the reading on the tach to get the actual RPMs the K181 is running? Thanks! Share this post Link to post Share on other sites
1961551 2 #2 Posted September 26, 2009 rob, all of the tachs i have for automotive puposes, are set up fpr 4,6 or 8 cylinder applications. most have a switch on the back, or a loop to cut to change the input pulse from the coil. if your tach is like the ones i have,i dont think you can accurately get it to function on a one cylinder application. Share this post Link to post Share on other sites
73-18 automatic 8 #3 Posted September 26, 2009 There is a company out there that has a tach for one cylinder and up it is made by Equus the site is http://www.equus.com/product_info.php?prod...category_id=100 and if you look on ebay I found one for around $75 Share this post Link to post Share on other sites
tranders 0 #4 Posted September 28, 2009 Ok. Thanks for the help! Share this post Link to post Share on other sites
Electro12WH 50 #5 Posted September 28, 2009 Also check out Tiny Tach. Be advised that you will need one for a Kohler K Series. They fire different than other one cyls. http://www.tinytach.com/ Share this post Link to post Share on other sites
