Anyone know were to find a "Debris Shield"?

[Polaris2007 4]

Hello all.

Thanks to those who helped me identify my rusted out "mystery part" as a "debris shield" for the back of the frame on my C-120. Now for the million dollar question.......Where can I get a useable replacement? Partstree.com shows it as unavailable. Anyone got one laying around that they would consider selling?

thanks, Jon H.

[N.C. horserider 5]

If you have any sheet metal around use the old one as template and drill holes, make cuts, bend, prime & paint etc. and save a couple bucks. If not you could always go to the Toro site and order one.

Attached Image

[Duff 206]

Jon, they show up on Fleabay fairly frequently and usually go cheap - I just got one for 99 cents. Joe's Outdoor Power parts out a lot of Wheel Horse tractors (unfortunately , but at least it gives us a source of parts), and they are among the few I've seen who actually take the machine down to every useable piece.

Duff :scratchead:

[Electro12WH 50]

If you can't make it, a sheet metal(heating&cooling) shop can. It might even be a good idea to make it out of aluminum.

[bitten 134]

Jon

I made my own, not to hard. Give it a try the worst thing is you need to buy one but at least you tryed.

P.J.