need help for my Toro Wheel Horse 110-4

[Piet 2]

Hi all, I recently bought a "revised" 110-4 (ID NUMBER E310B401   40359) but had to tinker a lot to make it a trustworthy companion.

Now the PTO Drive belt has broken (part 114231) but I cannot find any size for it? The broken belt outside length is about 104cm/about 41 inch but I don't know if I recuperated all of the broken belt.

Also is there an easy way to take of the mower deck to make access easier?

Thanks in advance,

Piet (Belgium, Europe)

[gwest_ca-(File Mod) 11,243]

Transmission drive belt 112147 (1/2" x 33.1")
Pto drive belt 114231 - (Gates replacement 6841 - 1/2" x 41")
Mower spindle belt 110420 replaced by 114567 (1/2" x 47.91")

[953 nut 57,878]

Click on this link and it will show you all of the manuals we have related to your Wheel Horse.

https://www.wheelhorseforum.com/search/?&q=110-4&type=downloads_file&search_and_or=or&sortby=relevancy

[Piet 2]

Thanks for the very swift help, belts are ordered.

Is there any manual describing the procedure to remove the mower deck? It's not in the manual and that would make replacing the belt so much easier.

 

Piet

Edited yesterday at 05:30 PM by Piet

[stvski80085 144]

You should be able to look on YouTube.  If it has the attachomatic it’s real easy

[Piet 2]

1 hour ago, stvski80085 said:

You should be able to look on YouTube.  If it has the attachomatic it’s real easy

I appreciate the response but I have a very hard time finding clips about my model 110-4 ...

 

Piet

[stvski80085 144]

7 hours ago, Piet said:

I appreciate the response but I have a very hard time finding clips about my model 110-4 ...

 

Piet

Yes, I realized after I posted you had a model I was not familiar with.  Sorry about that.