Yeet 1 #1 Posted Saturday at 03:50 PM Hello, new here and can’t find any information on my mower! I have a 1975 c-120 with a 2 blade mower. I have a mule drive and I believe I need a 141 inch belt. Can anyone validate this? I tried it years ago and the belt snapped in 3 mows. Any advice would be appreciated. Thanks! 1 Share this post Link to post Share on other sites
Gasaholic 254 #2 Posted Saturday at 06:55 PM Deck belt size is going to depend on the deck, so we'd need more info , I suspect you have a newer model year 37 inch with the 6 sided one-piece belt.. IMO the worst deck design wheel horse ever made (But then I think it was a Toro design?) 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,234 #3 Posted Sunday at 10:51 AM Welcome to Red Square If you have the six-sided belt click on the picture Share this post Link to post Share on other sites
peter lena 9,074 #4 Posted Sunday at 12:42 PM @Yeet AGREE WITH @Gasaholic on the worst rated deck out there , would personally pick up , and service a 36 or 42 " rear or side discharge deck . got one of those with a blower set up, incredibly dysfunctional unit , every point on it was trashed , gave it away for parts . look for any deck rot , and blade spindle movement ease / related noise / roughness . that is the type of deck you want , with proper movement detailing , they are very good . pete Share this post Link to post Share on other sites
Yeet 1 #5 Posted Sunday at 04:03 PM Thanks everyone! That is my deck in the diagram and everything moves fine and it’s in great shape! That part number helped a lot and I am ordering one now! My mower has the hydraulic ram to raise and lower accessories. That’s the only reason I’m keeping the mower and want to use it with the mower and snowblower. Thank you! Share this post Link to post Share on other sites
