TC10284 111 #1 Posted March 28 I am trying to adjust the valves on a 312-8 with Kohler M12 for maintenance purposes. I have done it on the K series Kohler, but so far not the Magnum series. In the picture, the plate with holes should come off to access the valve adjustment correct? I assumed the plate is just stuck really well to a gasket and won't budge. https://photos.app.goo.gl/9BGJXDuZc5zW1bKZA Share this post Link to post Share on other sites
953 nut 57,464 #2 Posted March 28 This manual will give you all the information you need. 2 Share this post Link to post Share on other sites
squonk 42,279 #3 Posted March 28 Yes it's stuck. Somebody probably glued the crap out of it. Share this post Link to post Share on other sites
TC10284 111 #4 Posted March 28 I finally got it off. Thanks! Share this post Link to post Share on other sites
