bobromanko 0 #1 Posted yesterday at 11:18 AM I'm a relatively new owner of a 1968 Electro 12. Unfortunately, the previous owner removed the hydraulics. It was great the first few days I ran it, then it started leaking transmission fluid. I suspected pressure in the case, so I checked to see if he removed the bypass valve. There was just a bolt and a spring, but no apparent valve. Looking in the manual, I don't see a good pic. Would someone please share a pic of the part(s) to be removed when the hydraulics aren't on the unit? Thanks... Share this post Link to post Share on other sites
Ed Kennell 39,877 #2 Posted yesterday at 12:13 PM to theBob. One of our Sundstrand experts should be here soon to help. @daveoman1966 @gwest_ca @pfrederi Share this post Link to post Share on other sites
gt14rider 815 #3 Posted yesterday at 12:34 PM (edited) Wrong pics Edited 20 hours ago by gt14rider Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,187 #5 Posted yesterday at 01:22 PM Can you reverse engineer it? More https://www.wheelhorseforum.com/search/?q=8-4111&quick=1&type=downloads_file Share this post Link to post Share on other sites
gt14rider 815 #6 Posted 23 hours ago Sorry post above is a piston to piston sundstrand, you have a Hydrogear . I'll see if I can get a better picture. 1 Share this post Link to post Share on other sites
gt14rider 815 #7 Posted 23 hours ago Bob need a little bit more information, were is it leaking? did it stop running suddenly? Share this post Link to post Share on other sites
daveoman1966 3,772 #8 Posted 20 hours ago 4 hours ago, gt14rider said: This photo is NOT what is in the Charger 12. You need to look at schematics of Sundstrand Hydrogear model 90-2046. hyd 90-2046 CHG 12.xlsx Share this post Link to post Share on other sites
TonyToro Jr. 1,724 #9 Posted 20 hours ago to !! Also of your Horse! Share this post Link to post Share on other sites
