Commando 8 restoration

[Handy Don 13,139]

The end of the steering arm is fine, since it only has the bolted on ball joints.

The tie rod end you are showing looks just about exhausted (and I can relate from experience that having a tie rod fall apart while driving is...unpleasant). @ebinmaine has posted making Heim-jointed tie rods (and many other members have done this as well). 

The spindle-axle seems ok from the picture, as long as the spindle cannot “wiggle” in the axle and you use the zerk to grease them up after assembly. 

You’re doing well!

[SylvanLakeWH 26,785]

Agree with @Handy Don.

 

Another source for tie rods is a vendor here on Redsquare - Wheelhorsepartsandmore.com.

 

I have purchased several pairs and very pleased with the quality. 
 

[ebinmaine 69,965]

I'd ad several vendors to check with. 

 

@Jake Kuhn

 

@76c12091520h

 

And Lincoln at A to Z Tractor in PA. 

CALL Lincoln with your old fashioned voice.  

 

I've dealt with all 3. All excellent. 

[1968Commando 51]

33 minutes ago, ebinmaine said:

I'd ad several vendors to check with. 

 

@Jake Kuhn

 

@76c12091520h

 

And Lincoln at A to Z Tractor in PA. 

CALL Lincoln with your old fashioned voice.  

 

I've dealt with all 3. All excellent. 

Oh ok thank you I’ll keep those in mind for future reference 

[Easton Rich 449]

What I've learned is, Eric/ebinmaine most of what he says makes sense. Hes helped me restore a b80 (the newer version of a commando 8) and now build a commando 8 puller.

[ebinmaine 69,965]

14 hours ago, Easton Rich said:

What I've learned is, Eric/ebinmaine most of what he says makes sense. 

 

I done learndeded from the fine folk here on Redsquare!!

[1968Commando 51]

Well, I went and got a paint stripper wheel for a grinder and put on a mask opened up the garage and windows in the garage plus the side door in the garage, and had a fan moving air. And then I got the top of the hood done and realized this thing worked great…..the breathing situation….not so much sooo I went and talked to my parents and we decided to wet sand and it looks ok in my opinion I don’t really know what I’m doing but hey,I’m trying, anyways that’s the update here’s some pictures for yall.

[ebinmaine 69,965]

14 hours ago, 1968Commando said:

paint stripper wheel

Pics? 

 

That might work well for your decals too.  

 

As for the breathing. 

You're obviously well aware that you need to be protected.  

NOW is the time to invest in a good quality mask.  

 

[SylvanLakeWH 26,785]

 

Wet sanding only goes so far... if you are grinding / sanding wear eye protection and a mask - at least N-95.

 

Ask yourself why a bunch of old guys are suggesting this... maybe some parts of us don't work like they should because back when we were young - way back for some of us - such stuff wasn't a "thing" or wasn't even available... passing on wisdom from our past follies... 

[1968Commando 51]

1 hour ago, SylvanLakeWH said:

 

Wet sanding only goes so far... if you are grinding / sanding wear eye protection and a mask - at least N-95.

 

Ask yourself why a bunch of old guys are suggesting this... maybe some parts of us don't work like they should because back when we were young - way back for some of us - such stuff wasn't a "thing" or wasn't even available... passing on wisdom from our past follies... 

I had a n95 on but I was sanding in the garage so I’ll probably move it outside when it’s not raining sometime soon. And use the wheel again

[ebinmaine 69,965]

1 hour ago, 1968Commando said:

I had a n95 on but

 

My Trina works in the health care field. 

Most folks (including me until the pandemic)  aren't aware that even though a mask has a particular rating,  it isn't necessarily the best answer.  

 

An N95 mask MUST BE FITTED PROPERLY or it is NOT certifiable as N95. Period.  

 

Trina is fairly small statured. 

I am most certainly not. 

 

We do NOT use the same mask. 

 

No fitting. No N95 rating.  

 

 

Do take the time now while you're aware of the situation and trying to solve it to find a proper fitting mask.  

 

 

[1968Commando 51]

Soo it’s crazy how time flys I can’t believe it’s been a month since I’ve posted on here I’m sorry, weathers been colder so I haven’t been working on the project much until lately this weekend I got the frame and other pieces sanded now I just gotta wait till warmer weather to get it primed not the best pictures but I figured nobody would really care to see sanded metal, also a question for yall,  I messed up when drilling thru the hood support bar and now there’s a broke drill bit stuck in there the hole is all the way thru and I’ve been using a punch go try and remove it and it’s not working is there any other solution to try and get it out?

[ebinmaine 69,965]

Can you get a close up picture of the bit broken in the hole?

 

I'm thinking maybe a file and then a punch and maybe a better quality harder drill bit?

[1968Commando 51]

Will 

12 hours ago, ebinmaine said:

Can you get a close up picture of the bit broken in the hole?

 

I'm thinking maybe a file and then a punch and maybe a better quality harder drill bit?

will get a picture for ya will probably be Saturday I am swamped right now with school and work