Wayne0 684 #26 Posted January 26 20 hours ago, Beap52 said: Actually if a fellow was to keep his thumb over the spark plug hole and hooked the spark plug wire to your pinky, it might fire up! Ask @Pullstart 2 Share this post Link to post Share on other sites
Bill D 2,044 #27 Posted Saturday at 04:05 PM Any updates on this? Curious what you found. Share this post Link to post Share on other sites
S416-8 342 #28 Posted Saturday at 04:10 PM I been slammed at work but hope to get into it today. Found another loose wire that I need to find where it goes Share this post Link to post Share on other sites
S416-8 342 #29 Posted Saturday at 11:10 PM (edited) well got some time on it and get nothing.. I'm sure a big issue on why is the fact that the ignition switch is shot. Have a new key switch ordered and then will get the wires run to it IMG_3421[1].HEIC Edited Saturday at 11:51 PM by S416-8 Share this post Link to post Share on other sites
S416-8 342 #30 Posted Sunday at 10:09 PM finally got out to the tractor and after messing around with out without ever getting it to turn over I pulled the starter and no go.. took it apart and 2 of the wries to the brushes are bard and grounding against the case.. so start point looks to be a bew starter.. Share this post Link to post Share on other sites
S416-8 342 #31 Posted Wednesday at 01:08 PM Starter should be here tomorrow. Not knowing how long this Sat is there anything that should be done re-test? I did add a small amount of oil in each piston and manually spun the motor but not sure if there’s anything that should be done with pumps. Thanks Share this post Link to post Share on other sites
