How to match implement to tractor

[tmurf 0]

I am looking to buy a used snow blower attachment for a C161 Wheel Horse wanted to know where to look to match it to my tractor. Is there a place to look?

Any assistance would be greatly appreciated!

Thanks, TMurf

[Lee1977 6,881]

gwest --ca (File Mod) should be along soon to give you a list. I'm no help we don't need them down here.

Edited yesterday at 02:24 AM by Lee1977

[gwest_ca-(File Mod) 11,145]

A list of the single-stage snowthrowers that will fit the C-161

 

Front quick hitch introduced in 1973. Snowthrower rear frame has a 5/8" diameter round bar for the front quick hitch.

1973-74 model 6-6212 plus 6-9113

1974 model 6-6213 - (First model to include 8-0221 extensions without the front straight return - just a flat plate)

1975 model 6-6214 - (First model to include 8-0221 [103552 replaced by 93-1617 and 93-1617-01] side extensions with the front straight return. First model to have a cable spool on chute rotating crank) Chute crank support decal 104461.

1976 model 6-6215 ------ Chute crank support decal 104461. This one -

1976 model 66-42ST01 - Chute crank support decal 104461. and this one are likely identical. The model number format changed.

1977 model 76-42ST01 - Chute crank support decal 104461. This one

1978 model 86-42ST01 - Chute crank support decal 104461. and this one

1979 model 96-42ST01 - Chute crank support decal 104461. and this one may be all the same. They started using a different model number for each model year.

1980 model 06-42ST01 - (Last 42" model to use 4 grooved rollers for the chute)

1981-82 model 06-42ST02 - (First model to use plastic collar for the chute but was a retrofit for older models. Last model to use wheels)

1983 model 06-42ST03 - (First model to use skids)

1984-87 model 06-42ST04 - (Last model to use a 3/4" diameter driveshaft)

1987-89 model 06-42ST05 - (First model to use a 7/8" diameter driveshaft)

1990 model 06-42ST06 - (Last model to use a cable to turn the chute)

1991-93 model 06-42ST07 - (First model with tall chute retained by 3 individual grooved retainers)

1993-2001 model 79360 - (2001 and earlier will fit 2002-2007 with kit 105-1503) (1994 first year for replaceable blower housing scraper bar)

2002-2007 model 79362

[Ed Kennell 39,275]

 to the Murf.

[SylvanLakeWH 26,161]

[Achto 27,939]

[rjg854 11,582]

   I hope gwest answered your question.  As you can see there's a wide range of years and models that will fit. That's the great thing about these tractors  

[gwest_ca-(File Mod) 11,145]

The blower housings are about 37" wide.

By adding the left and right extensions gets the 42" width.