Steven The Commando/B-80 Puller

[Easton Rich 404]

Yes I’m swapping it to a 10hp. There is no wiring left. It has a 5 prong ignition 

[Easton Rich 404]

@Handy Don I’ve got a ton a of stuff on order (including a flywheel and a ring gear for it), plus I’ve already done some modifications to the engine to accommodate these items. I’ve also relocated the battery box, so it won’t be a problem.

[ebinmaine 68,775]

1 hour ago, Easton Rich said:

It has a 5 prong ignition

 

EXTREMELY IMPORTANT 

 

 

Verify which ignition switch you have.

You MUST be able to read the letters on the existing switch to identify what it is.  

 

 

 

A 5 prong switch means you likely had the regular starter,  not the S/G.

 

 

 

[ebinmaine 68,775]

1 hour ago, Easton Rich said:

I’ve already done some modifications to the engine to accommodate these items

 

 

Like what?

 

What's the 10 HP you have out of? 

 

 

 

[Easton Rich 404]

It’s got all of the brackets for the S/G. I think this thing has been cobbled together. The dash is not original, it has a cigarette lighter, and a different shifter ball

[Easton Rich 404]

I’m not 100% on what the engine is out of 

[Handy Don 12,611]

1 hour ago, ebinmaine said:

Verify which ignition switch you have.

Because both magneto and battery ignition switches have 5 prongs but work differently in critical ways. Don’t risk damaged electrics.

[Easton Rich 404]

I’m not, I’m going bare minimum on all of my wiring/electrics because I don’t need them for what this is going to be used for