Something doesn’t line up right on my 401

[Maynardb 13]

Hi

im trying to reinstall the trans in my 401 and the brake adjustment arm doesn’t line up right. ( should of taken pictures) what am I doing wrong?

thx

[Achto 28,688]

1 hour ago, Maynardb said:

Hi

im trying to reinstall the trans in my 401 and the brake adjustment arm doesn’t line up right.

 

Here is a picture of the brake on my 401.

 

[WHX?? 50,620]

6 minutes ago, Achto said:

brake on my 401.

Looks like he's got the 5003 tranny with the 90 brake tab. Not sure how the brake rod looks on those. I don't think you have the right one Maynard.

Edited January 3 by WHX??

[Achto 28,688]

14 minutes ago, WHX?? said:

Not sure how the brake rod looks on those. 

 

Is that the same as an RJ58?? Got any pics of yours?

[Achto 28,688]

@Maynardb I think the rod from the peddle goes in the top hole and the rod to the band goes in the bottom hole. ??

 

[WHX?? 50,620]

3 minutes ago, Achto said:

Got any pics of yours?

No all hidden by the tire or fender. I thought it had a 5010 tranny anyway... could be wrong

Some one don't chime in I'll run down to the hauler and look. That's where it's winter quarters is. 

[WHX?? 50,620]

You sure that's a 401 @Maynardb ??

 

That tranny went out in '59.

[Maynardb 13]

I’m pretty sure it is. It has a Lauson H55 motor , but I figured it out anyway. Turns out the parts trans ( which this is mostly may be from an RJ 58 perhaps)  does not have the same side cover. The location where the brake bolts to, is in a different click position than the original trans so I’ll have to switch side covers to set it up like original. thanks for checking in about it. 

Edited January 3 by Maynardb

[Racinbob 11,702]

Definitely a 5010 linkage. Here's the 5003.

 

Edited January 3 by Racinbob