Steel wire diameter

[PhilD 0]

Hi , Happy New Year Everyone. I need the wire that attaches from the plow angle handle to the little bracket below that allows you to angle the blade. It’s a thin wire , I thought I’d ask before buying a bunch of different sizes for trial and error.  Thanks 

[SylvanLakeWH 27,494]

'Bout coat hanger size... or the size they use to hang ceiling tiles... or around 9 gauge...

[peter lena 9,085]

@PhilD   note , how elastic lock nuts , hold perfect movement setting , also strive for squeeze lever , zero play , for maximum rod to  steering quadrant movement pull  , lubricate as you go , like penetrating oil and red spray grease , that plow can and should move with total solid ease , sound like a rifle bolt . hitch pin clips at rear axel lever stops , pete

 

[moe1965 752]

The wire that are used for yard signes works great

[oliver2-44 10,351]

15 hours ago, SylvanLakeWH said:

 or the size they use to hang ceiling tiles... or around 9 gauge...

 

[Achto 28,757]

On 1/1/2025 at 5:30 PM, PhilD said:

It’s a thin wire , I thought I’d ask before buying a bunch of different sizes for trial and error.  Thanks 

 

On 1/1/2025 at 5:47 PM, SylvanLakeWH said:

'Bout coat hanger size

 

Straighten out an old wire coat hanger that you probably have laying around some where. This is what I did with mine, works great.

 

 

Edited January 3 by Achto

[Chaz54 70]

I just measured the wire on my plow and it measures 0.122” or about 8 gauge. A coat hanger measures 0.090” or about 11 gauge wire. There is 9 gauge project wire at Lowe’s that would work for you.

Edited January 3 by Chaz54