Snowblower questions.

[adsm08 2,181]

I was getting ready for winter today, and based on the tracker we were watching at work yesterday I decided to mount the blower, rather than the plow. I believe the blower is an ST-325 (Tag is hard to read, looks right to the ST-325 manual), and it's on an 855.

 

I was looking at the hand-control for the belt on the blower, and I'm not sure I'm in love. Among other things the tensioner pulley looks like it might need a little TLC, but it also looks like I have to stay bent over and holding tension on the belt manually while using it..

 

Anyway, does anyone know of any reason I can't just put a little bit longer belt on there and use the foot control tensioner used with the mower deck?

[wallfish 17,080]

1 hour ago, adsm08 said:

I was getting ready for winter today, and based on the tracker we were watching at work yesterday I decided to mount the blower, rather than the plow. I believe the blower is an ST-325 (Tag is hard to read, looks right to the ST-325 manual), and it's on an 855.

 

I was looking at the hand-control for the belt on the blower, and I'm not sure I'm in love. Among other things the tensioner pulley looks like it might need a little TLC, but it also looks like I have to stay bent over and holding tension on the belt manually while using it..

 

Anyway, does anyone know of any reason I can't just put a little bit longer belt on there and use the foot control tensioner used with the mower deck?

The belt might hit the front axle. But nothing a well placed idler couldn't adjust out

Edited 15 hours ago by wallfish

[stevasaurus 22,868]

Do you have the guide pulley that bolts on the front bolt of the attach-a-matic?

Shown in front of the mower belt.

[adsm08 2,181]

1 hour ago, stevasaurus said:

Do you have the guide pulley that bolts on the front bolt of the attach-a-matic?

Shown in front of the mower belt.

 

No. But if I found one I'd probably grab it.

Edited 14 hours ago by adsm08

[adsm08 2,181]

@stevasaurus

 

I just found another thread from 2016 where you posted up detailed pictures with dimensions for that bracket. It looks like that's something I can build, and Lowell appears to have the pulley.