Jump to content
Maynardb

Source for axle seals #1257/83-2840

Recommended Posts

Maynardb

Hi

does anyone know of a cheaper source for these axle seals? $30 each isn’t cheap but so far, I haven’t found any cheaper source

thx

Share this post


Link to post
Share on other sites
 
WHX??

Only guy I know has them is Lowell and he gets 35 a piece. Yah little high for a lousy seal but wadda ya gonna do when they're not made anymore?

Share this post


Link to post
Share on other sites
 
Bar Nuthin

You'll need to research the specifications, but I think this SKF seal may be the equivalent.

 

Amazon.com: SKF 9815 LDS & Small Bore Seal, R Lip Code, HM14 Style, Inch, 1" Shaft Diameter, 1.25" Bore Diameter, 0.125" Width : Automotive

Edited by Bar Nuthin

Share this post


Link to post
Share on other sites
 
gwest_ca

The OD of the seal does not go into a bore. The OD is installed over the axle tube.

Share this post


Link to post
Share on other sites
 
Racinbob
15 hours ago, Bar Nuthin said:

You'll need to research the specifications, but I think this SKF seal may be the equivalent.

 

Amazon.com: SKF 9815 LDS & Small Bore Seal, R Lip Code, HM14 Style, Inch, 1" Shaft Diameter, 1.25" Bore Diameter, 0.125" Width : Automotive

 

The SKF 9815 is the 100863 for the two piece case 1"axle transmissions. :)

  • Like 1

Share this post


Link to post
Share on other sites
 
WHX??
19 hours ago, Bar Nuthin said:

SKF seal may be the equivalent.

Yeah nice try Bar but not the same seal. 

Back when I did my first two piece the 9815 could be had  for 4 bucks and the 1257 was reasonable. Other ones are still affordable. Kinda the same thing with bearings. 

Me thinks seal manufactures are trying to capitalize on our addiction to horses ... :sad: :soapbox:

  • Like 2

Share this post


Link to post
Share on other sites
 
Bar Nuthin
4 minutes ago, WHX?? said:

Me thinks seal manufactures are trying to capitalize on our addiction to horses ... :sad: :soapbox:

:text-yeahthat:

  • Like 1

Share this post


Link to post
Share on other sites
 
peter lena

@Maynardb https://defender.com/en_us/wpt-flax-packing-extractor-tool-size-0-10159?utm_id=146308134413&utm_campaign=19735474070&utm_source=google&utm_medium=paid&utm_content=649561297602&gad_source=1&gclid=CjwKCAiAyJS7BhBiEiwAyS9uNZD4APeKDxqysxqYODJoBs6JJiJU2mnXamEwfh_EfSPvpuRZek3kSRoCyCsQAvD_BwE  packed hundreds of  tank / vessel   stuffing boxes , upper glass agitator area , make a tiny side seal hole , screw in , pull out . also like , SUPER LUBE  as a rotational lubricant , multi spec for many applications , terrific in  choke and throttle cables , check temp range , this lube is also excellent on jacket , plastic/ nylon zippers , effortless slide , pete  

Share this post


Link to post
Share on other sites
 
76c12091520h

These seals are still available from Toro. Pricey- yes, but it is the ONLY source for them. I keep them in stock at all times. If you have a local Toro dealer that has some in stock they may sell them cheaper if it's old inventory that they are looking to dispose of and the only people using this part #  is those of us collecting them.

20220918_135234[1].jpg

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...