Slot Hitch - how strong?

[953 nut 55,827]

19 hours ago, Bar Nuthin said:

 

 

Any problems with using 2" x 1/2" bar stock to build attachments?

Or, would it benefit to shim it to get to the 5/8" that Don indicates?

I used a 2" X 3/4" flat bar and shaved off 1/8" with the port-a-band where it enters the slot hitch.

[Bar Nuthin 541]

19 minutes ago, 953 nut said:

I used a 2" X 3/4" flat bar and shaved off 1/8" with the port-a-band where it enters the slot hitch.

 

I'll have to see what I have stashed away in my scrap collection.

It just dawned onto me that this setup will be perfect for my lawn aerator, detacher, and drop spreader.  None of them handle turns very well and are a PIA when crossing a couple sidewalks I have to deal with.

[ebinmaine 68,406]

27 minutes ago, Bar Nuthin said:

stashed 

scrap

collection.

 

Three words that prove you belong with this cluster of clowns

[Handy Don 12,467]

3 hours ago, Racinbob said:

 

I probably have one but it would be in a box with hundreds of pre digital photos. I've been meaning to go through them and digitize them but I've been meaning to do that for years. 

Cellphone = basic photo digitizer!

[Racinbob 11,232]

1 hour ago, Handy Don said:

Cellphone = basic photo digitizer!

I actually got all the boxes out this morning. That's a start! 

[Lee1977 6,803]

Here a steel Slot Hitch that Geoff Cornwall built off Stormin Norman's plans. There a set of drawings on one of there post 

A picture of the Slot Hitch on a post built by Geoff "Rocker Shaft". Might have been built for a metric bar as the slot was only 1 15/16" wide.

 

[Bar Nuthin 541]

4 hours ago, Lee1977 said:

Here a steel Slot Hitch that Geoff Cornwall built off Stormin Norman's plans. There a set of drawings on one of there post 

A picture of the Slot Hitch on a post built by Geoff "Rocker Shaft". Might have been built for a metric bar as the slot was only 1 15/16" wide.

 

Are these the drawings you speak of?

 

 

[Lee1977 6,803]

yes

[kpinnc 12,539]

2 hours ago, Bar Nuthin said:

Are these the drawings you speak of?

I mean this in all sincerity: You now have graduated and are officially sickness-infested as a member here. In other words, the litmus test is that you used the search feature! 
 

If you weren’t hooked before, you are now! 

[Bar Nuthin 541]

19 minutes ago, kpinnc said:

the litmus test is that you used the search feature!

 

 To be fair, I've designed, built, and managed a few CMS forums in the past. Mostly poker related. But this one tops them all as far as member participation!!!

Luckily there's no chat rooms, or none of us would get our tractors finished 

[953 nut 55,827]

5 minutes ago, Bar Nuthin said:

Luckily there's no chat rooms, or none of us would get our tractors finished

Kiss your extra time good by, our chat room, called the Basement, is all the way down near the bottom of the home page.  

[ebinmaine 68,406]

15 minutes ago, 953 nut said:

Kiss your extra time good by, our chat room, called the Basement, is all the way down near the bottom of the home page.  

 

 

Oh now ya done it....

[Lee1977 6,803]

19 hours ago, ebinmaine said:

 

Oh now ya done it....

He'll find Squonk hangs out down there, and nothing much happens ! 

[953 nut 55,827]

2 hours ago, Lee1977 said:

He'll find Squonk hangs out down there, and nothing much happens ! 

I didn't give the chat room a five star rating, I just provided directions to it. Your gas mileage may vary depending on how many beans you have consumed.