Retired Wrencher 5,463 #1 Posted November 19 Is there a chart for frame laths by model of tractor. Thanks in advance. 1 1 Share this post Link to post Share on other sites
953 nut 55,284 #2 Posted November 19 I think Eric @ebinmaine has done the measurements on short, medium and long frames if memory serves me correctly. 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #3 Posted November 19 @gwest_ca ? @Retired Wrencher I know that 1966 and older are all short frames except for the 953 and 1054 models. 1967 is when they started the split. 867 were short. 1067 and 1267 were long. 1968 to 1973 I believe most were long. I'm not sure if they were short frames in that time. Maybe Commando?? 1974 and 1975 the B Series were mid length. 1976 and 1977 the B series were long frames. 1974 and up the C Series were all long frames. There are of course exceptions along the way such as GT14 or D series or Lawn Ranger or the 1978 and up B series which was a lawn tractor. 6 Share this post Link to post Share on other sites
Lee1977 6,663 #4 Posted November 19 The medum frame on 74 and 75 B series was 2" shorter then the long frame used on most later model tractors. 1 Share this post Link to post Share on other sites
rjg854 11,377 #5 Posted November 19 68 Commando 8 is a short frame tractor. 😉 1 Share this post Link to post Share on other sites
kpinnc 12,078 #6 Posted November 19 (edited) 4 minutes ago, rjg854 said: 68 Commando 8 is a short frame tractor. There was a “no name” 8 horse 4 speed that was short as well. Otherwise basically identical to the older Commando. Edited November 19 by kpinnc 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #7 Posted November 19 32 minutes ago, rjg854 said: 68 Commando 8 is a short frame tractor. 😉 28 minutes ago, kpinnc said: There was a “no name” 8 horse 4 speed that was short as well. Otherwise basically identical to the older Commando. I was wondering about those... No name from 1973? Share this post Link to post Share on other sites
kpinnc 12,078 #8 Posted November 20 2 hours ago, ebinmaine said: No name from 1973? Yes sir. 6 inch front, 10 inch rear wheels. Tiny thing. 1 Share this post Link to post Share on other sites
ebinmaine 67,562 #9 Posted November 20 16 minutes ago, kpinnc said: Yes sir. 6 inch front, 10 inch rear wheels. Tiny thing. Sounds like a formula for Trina's new fresh grand baby's tractor... in about 4 years... 1 Share this post Link to post Share on other sites
Retired Wrencher 5,463 #10 Posted November 20 Ok Guys thanks for the input. Just thought there might be a chart here of size and length of frames. Enjoy your day. Share this post Link to post Share on other sites
Retired Wrencher 5,463 #11 Posted November 20 22 hours ago, ebinmaine said: @gwest_ca ? @Retired Wrencher I know that 1966 and older are all short frames except for the 953 and 1054 models. 1967 is when they started the split. 867 were short. 1067 and 1267 were long. 1968 to 1973 I believe most were long. I'm not sure if they were short frames in that time. Maybe Commando?? 1974 and 1975 the B Series were mid length. 1976 and 1977 the B series were long frames. 1974 and up the C Series were all long frames. There are of course exceptions along the way such as GT14 or D series or Lawn Ranger or the 1978 and up B series which was a lawn tractor. So Eric:I know that 1966 and older are all short frames: So that would make the 1056 would be a short frame. Share this post Link to post Share on other sites
ebinmaine 67,562 #12 Posted November 20 12 minutes ago, Retired Wrencher said: So Eric:I know that 1966 and older are all short frames: So that would make the 1056 would be a short frame. Ya know.... I forgot about that 1966 10 horse. I believe those were actually a LONG frame Gary. 8 HP was short, 10 HP was long. Share this post Link to post Share on other sites
953 nut 55,284 #13 Posted November 20 1 hour ago, ebinmaine said: Ya know.... I forgot about that 1966 10 horse. I believe those were actually a LONG frame Gary. 8 HP was short, 10 HP was long. 855 and1055 short frame ran a 70" drive belt, 856 runs a 70" drive belt but the1056 has a 76" drive belt so you are correct based on this. 1 Share this post Link to post Share on other sites
John2189 454 #14 Posted November 20 I took a screenshot of this sometime ago. No clue who posted it. Hope this helps 5 Share this post Link to post Share on other sites
ebinmaine 67,562 #15 Posted November 20 31 minutes ago, 953 nut said: 855 and1055 short frame ran a 70" drive belt, 856 runs a 70" drive belt but the1056 has a 76" drive belt so you are correct based on this. After it was brought up this morning I remember reading that the 1965 model year was the only year to have a big block and a short frame. 1045 and 1055 2 Share this post Link to post Share on other sites
Retired Wrencher 5,463 #16 Posted November 21 22 hours ago, John2189 said: I took a screenshot of this sometime ago. No clue who posted it. Hope this helps @John2189 Thanks for the info this helps. 3 Share this post Link to post Share on other sites
