Bronco Jody 115 6 #1 Posted November 3 (edited) I have a 72 Bronco 14 auto. I have been looking for info on how to get my Elec PTO apart. Found service documents but I need to take mine apart (I think) it is locked up with no power going to it while tractor is running and is gritty when turned by hand. It’s on a Bronco that was saved from a scrap yard. I’m new here so maybe I just don’t know how to search and find info yet? Edited November 3 by Bronco Jody 115 Share this post Link to post Share on other sites
WHX?? 48,847 #2 Posted November 3 & thank you for saving one from scrap. There is a manual that tells how to get it off the motor and take it apart. I do not have access to my files at the moment but others will be along to welcome and help you out. @pfrederi might know a thing or two about them. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,069 #3 Posted November 3 The way to remove the pto is to thread a large bolt into the center - it will contact the end of the crankshaft and push it out of the pto. Some service bulletins 1 2 Share this post Link to post Share on other sites
Bronco Jody 115 6 #4 Posted November 3 Thank you, that might be what I need. I’ll try that in the morning. Share this post Link to post Share on other sites
ebinmaine 67,754 #5 Posted November 3 @Maz91 is about to "inherit" a Bronco 14 Automatic. This thread would be useful to him as well. 1 Share this post Link to post Share on other sites
pfrederi 17,742 #6 Posted November 3 This thread I did shows some things on taking them apart 1 Share this post Link to post Share on other sites
Bronco Jody 115 6 #7 Posted November 3 Perfect! Big help. Share this post Link to post Share on other sites
