Diesel Drage 0 #1 Posted October 18 Will a 79351 mid mount grader blade fit a D200? Thanks Share this post Link to post Share on other sites
ri702bill 8,327 #2 Posted October 18 Welcome. This is from the Implements and Attachments heading... Helpful chart as to who plays well with others... not all play well..! Share this post Link to post Share on other sites
953 nut 55,261 #3 Posted October 18 (edited) The frame on the "D" is wider than the models this blade was built for. If you have a rear axle snow plow bracket on your "D" it may fit OK. Thake a look at these downloads. https://www.wheelhorseforum.com/search/?q= 79351 &quick=1&type=downloads_file&nodes=19 Edited October 18 by 953 nut 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,046 #4 Posted October 18 Welcome to Red Square 79351 fits the 300, 400 and 500 series of tractors. Here is what the D-Series used 1 Share this post Link to post Share on other sites
c-series don 8,708 #5 Posted October 18 A quick way to tell if it’s for a D-Series is this drop in the frame circled in red. Share this post Link to post Share on other sites
