Phan 14 #1 Posted October 14 Dear Expert Friends! I am curious how much is the fair price for GT14 H that is restored as shown in the pictures. I want to pick a deck (that beeing offered 100CAD) - still solid no seazing the spindles (by the seller). He showed me his GT14 H. Any advices - Thanks! Share this post Link to post Share on other sites
oliver2-44 9,725 #2 Posted October 14 (edited) Mice straight tractor I see rust on the frame rails in front of the engine and some other areas, makes me wonder if just the outside was rattle can painted. Id ask him for details about the "restoration. Was any work done to the engine and or transmission. Was it completely disassembled to paint? Are tires fairly new? Edited October 14 by oliver2-44 2 Share this post Link to post Share on other sites
953 nut 55,155 #3 Posted October 14 Restored GT-14 in my opinion is a tractor that has been completely gone through to make it like new. At the very least the engine would be rebuilt and transmission bearings and seals replaced. You are looking at a repainted tractor with a nice seat. If it runs well and the transmission is strong and is not too far from your home a good used GT-14 should be worth $ 600 +/- USD in my opinion. The deck shown is not the deck that would have come with a GT-14, it could be made to work but some pieces of the belt drive mechanism are not shown and would have to be with it. Share this post Link to post Share on other sites
Phan 14 #4 Posted October 15 13 hours ago, 953 nut said: Restored GT-14 in my opinion is a tractor that has been completely gone through to make it like new. At the very least the engine would be rebuilt and transmission bearings and seals replaced. You are looking at a repainted tractor with a nice seat. If it runs well and the transmission is strong and is not too far from your home a good used GT-14 should be worth $ 600 +/- USD in my opinion. The deck shown is not the deck that would have come with a GT-14, it could be made to work but some pieces of the belt drive mechanism are not shown and would have to be with it. Thanks a lot 953 nut ! The seller said that no work had been done on the engine and transmission (as oliver2-44 suggested I checked), although he said that he bought seals and gaskets in case they were needed in the future. The desk will not be used for the tractor. 13 hours ago, 953 nut said: 1 Share this post Link to post Share on other sites