Rockcrawler69 11 #1 Posted October 11 Hello, I found the charts that show what rototiller fits which years, but the tiller I'm looking at doesn't have a model number on it. Is anyone able to tell by looking at it to see if this will work on a 1993 416-8 manual or a 1996 520 hydro? The guy only has the tiller so I'll end up having to piece the rest together. 4 Share this post Link to post Share on other sites
c-series don 8,677 #2 Posted October 11 That will work, however you will need the pulleys that clip into the mid-mount Tach-A-Matic, rear axle mount and lift cable. Good news is that those tines on that tiller are in great shape with plenty of life left in them. 5 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,039 #3 Posted October 11 This is the tiller both your tractors used with the 416-8 the better choice in my opinion. Will give you an idea what else is required. 3 Share this post Link to post Share on other sites
Pullstart 62,829 #4 Posted October 11 8 speed for the win, always! However, was it @Monstrosity who intentionally twisted his belt and the tiller pulls backward now with his hydro machine? Like the Ponds, if there is a need with these Horses, someone will find a way! 1 Share this post Link to post Share on other sites
Rockcrawler69 11 #5 Posted October 11 Thank you everyone for the replies. Gwest thanks for the manual! Huge help! Share this post Link to post Share on other sites
Monstrosity 1,127 #6 Posted November 2 On 10/11/2024 at 7:48 AM, Pullstart said: 8 speed for the win, always! However, was it @Monstrosity who intentionally twisted his belt and the tiller pulls backward now with his hydro machine? Like the Ponds, if there is a need with these Horses, someone will find a way! Yessir been MIA lately sorry for the delay pumpkin season is officially over now back to regular programming. Yes I gave the belt a twist and she pulled against the forward direction. Belt is good slight rubbing but not detrimental to the belt Share this post Link to post Share on other sites
Monstrosity 1,127 #7 Posted November 2 On 10/10/2024 at 9:24 PM, c-series don said: That will work, however you will need the pulleys that clip into the mid-mount Tach-A-Matic, rear axle mount and lift cable. Good news is that those tines on that tiller are in great shape with plenty of life left in them. Wheelhorsepartsandmore.com has the pulley setup with tension spring. Cheapest easiest and brand new! Don't waste time scouring ebay or FB marketplace . Share this post Link to post Share on other sites
