Easton Rich 251 #51 Posted October 19 Shall I go with the el cheapo harbor freight gun to do this project. Trying to do this low budget Share this post Link to post Share on other sites
Retired Wrencher 5,450 #52 Posted October 19 (edited) Easton you do not have to paint it. There are other ways that will keep the original pant. I use Marvel on it to protection what is there. Others use wet sanding. They are only original once. Just my Edited October 19 by Retired Wrencher 1 Share this post Link to post Share on other sites
Easton Rich 251 #53 Posted October 20 I’ll try that Thanks Share this post Link to post Share on other sites
Easton Rich 251 #54 Posted October 20 Do any of you know where I can find a replacement shifter boot for the 8 speed tranny? 1 Share this post Link to post Share on other sites
oliver2-44 9,726 #55 Posted October 20 Wheel Horse Parts and More has them. Their are also several vendors on eBay that have them. Share this post Link to post Share on other sites
Easton Rich 251 #58 Posted November 9 As you’ve seen in some of my earlier posts I have the b80 all torn down and a few parts ready for primer. Now all the parts are ready for primer and I have to start taping 2 Share this post Link to post Share on other sites
Easton Rich 251 #60 Posted November 9 Priming everything in the barn 2 Share this post Link to post Share on other sites
