a few more followed me home, no horses this time.

[Keaton 433]

I went and got 3 more tractors last night. a huffy model H 1016 is the model it like a mustang mower if you have heard of one, the engine is free 5 hp briggs , a bonanza "truck" tractor witch is blue and is pretty neat, engine turns looks complete 8 or 10 hp electric start briggs , and a craftsman 131.96285 with a tecumpseh, engine is stuck and steering is stuck, and it looks complete also, has a plastic hood, but I got them for a great deal $150 for all them in a week or 2 I'm going back to get the Springfield 36. for more on top of these 3. there neat I'll get them unloaded when I get home and get some pictures of each of them. 

[953 nut 55,163]

                                                                       

[ebinmaine 67,397]

4 hours ago, 953 nut said:

                                                                       

 

 

[Keaton 433]

as promised here they are, first the huffy. spins over good and rolls well, I look the carb off this morning and float bowl is there in the tank and the tanks pretty nice, that shouold run but the throttle on the carb barley turns and sorry it was dark when I got back from the homecoming parade, I'm going to get the Springfield 36 next week it  was in another building

Edited September 27 by Keaton

[Keaton 433]

this is the craftsman, its pretty rough, stuck engine and stuck steering, I sprayed all of them down in pennatrating oil. these are all pictures of before I washed them, one in here is after I washed it, the hood cleaned up nice

[Keaton 433]

and last but not least the bonanza, seat cleaned up great. and it spins over decent now, only electric start, the recoil if it had one and cover is missing. its not a terriable mechine, I was told the bonanza and huffy ran and drove once, I believe it, I bet by next week I'll have they huffy running its pretty hopefull after I get spark

[ebinmaine 67,397]

1 hour ago, Keaton said:

hood cleaned up nice

 

Excellent work on that!

[Keaton 433]

@ebinmaine thanks, just some good old preashure washing, you should have seen the cement once I got them moved it had crap everywhere 

[Keaton 433]

update, the huffy has spark I'll but the carb back on in the morning and see if it will start. and the craftsman I just took the hood off of. I got it eventually and tommrow were dropping the engine back in my truck,  yay! and then I'll turn to the tecumpse, awww, but I'll give it a whirl, they either just need a carb clean end fire up or they need a lot more it seams same for the Briggs engines. Kohler's are there own game 

[Keaton 433]

the huffy runs, the carb is not sealed 100 % I will fix that tomorrow, it ran for a solid 3 minutes and mentioned above 

On 9/28/2024 at 11:31 PM, Keaton said:

and tommrow were dropping the engine back in my truck

the engine is back in my truck, we set the fuel injection on it now we got to wire it all up, 

[Keaton 433]

tried fixing the carb now it wont start. dont know why the gasket material was probally a bad idea. cant figure it out

[Keaton 433]

it rung good now I did not have a hold in the gasket for fuel to the float bowl inside the tank 

[ebinmaine 67,397]

8 hours ago, Keaton said:

it rung good now I did not have a hold in the gasket for fuel to the float bowl inside the tank 

 

 

Nice catch. 

I've done similar. 

Lesson learned. 

 

[Keaton 433]

yup, youtubeing helps a lot