rod ends , make movement ends easy

[peter lena 8,625]

https://www.amazon.com/fascinatte-723-0448-923-0448-723-0448A-923-0448A/dp/B08V4ZVB9D/ref=asc_df_B08V4ZVB9D/?tag=hyprod-20&linkCode=df0&hvadid=693770002238&hvpos=&hvnetw=g&hvrand=4891083975762741296&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-1244579436896&psc=1&mcid=3ffcdb8e1c053480a0ab5147a7bedfdc   been adding heim joints  to rod ends for years , their 360 degree transfer of thrust , in any sloppy  / erratic pull / push point , also dramatically  enhances function , add lubrication , snug up entire set up , if you paint it red , no one will know , pete  

[ebinmaine 67,484]

McMaster Carr. 

Excellent source.  

 

[John2189 453]

4 hours ago, peter lena said:

https://www.amazon.com/fascinatte-723-0448-923-0448-723-0448A-923-0448A/dp/B08V4ZVB9D/ref=asc_df_B08V4ZVB9D/?tag=hyprod-20&linkCode=df0&hvadid=693770002238&hvpos=&hvnetw=g&hvrand=4891083975762741296&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1018127&hvtargid=pla-1244579436896&psc=1&mcid=3ffcdb8e1c053480a0ab5147a7bedfdc   been adding heim joints  to rod ends for years , their 360 degree transfer of thrust , in any sloppy  / erratic pull / push point , also dramatically  enhances function , add lubrication , snug up entire set up , if you paint it red , no one will know , pete  

The link is for ball joints 

[peter lena 8,625]

@John2189  been doing  that  elimination of sloppy  movement connection for years , always look at a , REPEDITIVE  PROBLEM , with a change . how about  plow lever , end links , pto lever end link , brake / clutch  lever ends ? totally eliminate the  sloppy movement end point  ?   functional detailing  on almost every  movement point , improves it , and it very often  does not take much , just how I look T chronic issue , pete