ebinmaine 67,390 #26 Posted September 19 Lots of excellent ideas and points above folks. As usual. Keep em comin' !! Share this post Link to post Share on other sites
wallfish 16,994 #27 Posted September 19 38 minutes ago, ebinmaine said: Having a proper hydro setup may be more beneficial over time. Absolutely 1 Share this post Link to post Share on other sites
Goldnboy 910 #28 Posted September 19 You can also go 8 speed and add the auxiliary oil resevior and pump and have dual hydraulics as i have done... 2 Share this post Link to post Share on other sites
Retired Wrencher 5,450 #29 Posted September 19 Just asking Eric why can’t you find a hydro side mount for this? I had a c141 that had a lift valve on the side to lift plow or blower. 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #30 Posted September 19 22 minutes ago, Retired Wrencher said: Just asking Eric why can’t you find a hydro side mount for this? I had a c141 that had a lift valve on the side to lift plow or blower. I certainly could.... I just already have the aftermarket lever and hoses from another tractor. I'd like to use what I have on hand. Share this post Link to post Share on other sites
Retired Wrencher 5,450 #31 Posted September 19 1 minute ago, ebinmaine said: I certainly could.... I just already have the aftermarket lever and hoses from another tractor. I'd like to use what I have on hand. Well good luck on what ever you decide Bud! 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #32 Posted October 10 On 9/15/2024 at 9:26 AM, pfrederi said: Implement Relief valve /springs Have to move Charge valve to other side. Rock Shaft Mount for non standard control valve??? I'd like to see better pics of this. Can @pfrederi or someone else tell me how to find them? Must be a manual of some sort? Share this post Link to post Share on other sites
c-series don 8,677 #33 Posted October 10 @ebinmaine I believe you’re correct about there being a manual on adding hydraulic lift to a manual lift tractor. I may have one, but I thinking not. I’ll look tomorrow. Finding the implement spring might be a challenge, but as you know you can find the rest of the items needed to add a factor lift assembly. I’d start by soaking the rock shaft with the penetrating oil of your choice. 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #34 Posted October 10 7 hours ago, c-series don said: soaking the rock shaft with the penetrating oil Luckily this one's been replaced by us when we did the build a few months ago. I'll need a hydro lift rockshaft though... @Ed Kennell you wouldn't happen to have one in your magic buckets? Share this post Link to post Share on other sites
pfrederi 17,697 #35 Posted October 10 12 hours ago, ebinmaine said: I'd like to see better pics of this. Can @pfrederi or someone else tell me how to find them? Must be a manual of some sort? 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #36 Posted October 10 1 minute ago, pfrederi said: Super awesome. Thanks Paul! Share this post Link to post Share on other sites
Ed Kennell 38,112 #37 Posted October 10 4 hours ago, ebinmaine said: you wouldn't happen to have one in your magic buckets? Sorry Eric, no help on the rock shaft. 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #38 Posted October 10 2 minutes ago, Ed Kennell said: Sorry Eric, no help on the rock shaft. No worries. I'll throw an ad up. 1 Share this post Link to post Share on other sites
Lee1977 6,655 #39 Posted October 10 EB just take some of that money you have squirreled away and buy another hydro Wheel Horse with the lift on it. You know you need just one more another one after that. Sooner or later you'll have all the part to convert the lift on the C-121. 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #40 Posted October 10 2 minutes ago, Lee1977 said: You know you need just one more another one after that Man.... we've already got something like 15 here. I don't think I need a couple more. Share this post Link to post Share on other sites
Lee1977 6,655 #41 Posted October 10 You could sell a couple that isn't used much to make room, That is after you get the ones you need. 1 Share this post Link to post Share on other sites
ebinmaine 67,390 #42 Posted October 10 1 hour ago, Lee1977 said: You could sell a couple that isn't used much to make room, That is after you get the ones you need. That's actually just about what I'm doing. Share this post Link to post Share on other sites
