kthomas62 44 #1 Posted September 6 I am needing a lower steering support block. Kevin Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,912 #2 Posted September 6 This one? Used by many models so a good used one should be available. Place a wanted ad in our classified section. It is no longer available from Toro. https://www.wheelhorseforum.com/classifieds/wanted/ Use [Add new classified] in red box. Include your approximate location. One may be not far away. 1 Share this post Link to post Share on other sites
ri702bill 8,095 #3 Posted September 6 Just a note - there are several variations of this block - early ones had thin mounting tabs that are prone to breakage and no thinwalled bushing in the lower hole. Next they added the thinwalled bushing in the lower hole to the same casting. The latest(?) is the best choice - it has the bushing and the mounting tabs are thicker....... Share this post Link to post Share on other sites
oliver2-44 9,392 #4 Posted September 6 Is your steering lock broken or just worn. If the holes are worn they can be drilled out and brass bushings installed. 1 Share this post Link to post Share on other sites
76c12091520h 3,585 #5 Posted September 6 (edited) New and reconditioned are in stock, private message sent. All our reconditioned supports have been rebushed top and bottom and range from $45-$55 depending which one you choose. Edited September 6 by 76c12091520h 3 6 Share this post Link to post Share on other sites
ri702bill 8,095 #6 Posted September 6 Excellent pictures & writeup to what I said earlier..... Share this post Link to post Share on other sites
