Andy N. 2,156 #26 Posted August 14 On 8/7/2024 at 6:59 PM, WHX?? said: Just throwing this in here FYI. When dealing with a ig switch harness that has been POed start with one of these. I ditch the crimp connectors in favor of soldering & shrink wrap. https://www.ebay.com/itm/112475723300 Agree 100% about soldering and shrink wrap. I have found these all in one solder / heat shrink work great! https://a.co/d/irYfHsF Share this post Link to post Share on other sites
smitty316 24 #27 Posted August 14 Thanks gwest. You guys have been great. I could still use some help locating where this switch goes though. Thanks, Smitty Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,072 #28 Posted August 14 If you take the drive belt cover off this is what you see. Click on the picture to enlarge Share this post Link to post Share on other sites
smitty316 24 #29 Posted August 14 Thanks gwest, I can see where it goes now and see that it's missing on my tractor. I'll put in on my Christmas list along with a bunch of other parts. Thanks, Smitty Share this post Link to post Share on other sites