roll pin punch , roll pins

[peter lena 8,627]

https://www.google.com/search?q=roll+pin&rlz=1C1CHBF_enUS866US866&oq=roll+pin+&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIHCAEQABiABDIHCAIQABiABDIHCAMQABiABDIHCAQQABiABDIHCAUQABiABDIHCAYQABiABDIGCAcQRRg80gEJMTQ4NjRqMGo0qAIAsAIB&sourceid=chrome&ie=UTF-8  often see a call for help on steering wheel rool pin removal , these specific pin , punches will help on size to size solid hit . also details the pin tension . design , critical lubrication on removal / installation, as referred , you must eliminate , any related IMPACT BOUNCING , on wheel pin removal , wall brace , and 3 lb hammer , like KROIL penetrant  , days out , just snoopin  related info , pete   

[ri702bill 8,320]

I agree with Pete on the bracing to allow for a solid hit with a 3 LB Hammer. DO buy a decent set of Roll Pin Punches, not some "soft" look-alike made of inferior (Chinesuim) material...

[ebinmaine 67,496]

1 hour ago, ri702bill said:

I agree with Pete on the bracing to allow for a solid hit with a 3 LB Hammer. DO buy a decent set of Roll Pin Punches, not some "soft" look-alike made of inferior (Chinesuim) material...

 

 

I'll second that having bought the cheap set first.

When I bent that almost immediately,  I went right back on the fleeebay and ordered a vintage USA 🇺🇸  made set.

[JCM 9,165]

[ebinmaine 67,496]

I couldn't recall what brand mine were so I went and looked. 

 

Wilde Tool. 

 

This is an online sales pic. 

[Wvtroutbum81 186]

Air chisel, no bracing or beating with a hammer.

This is the way, roll pin comes out in seconds.

[ebinmaine 67,496]

16 minutes ago, Wvtroutbum81 said:

Air chisel, no bracing or beating with a hammer.

This is the way, roll pin comes out in seconds.

 

 

I  gotta remember to try that!

[Sailman 1,291]

On 8/1/2024 at 7:03 PM, Wvtroutbum81 said:

Air chisel, no bracing or beating with a hammer.

This is the way, roll pin comes out in seconds.

 

Is there some kind of adapter for the roll pin punch to correctly fit into the air chisel??

[adsm08 2,057]

1 hour ago, Sailman said:

Is there some kind of adapter for the roll pin punch to correctly fit into the air chisel??

 

 

Vice grips.

[Wvtroutbum81 186]

14 hours ago, adsm08 said:

 

 

Vice grips.

I just cut the end off a old chisel and welded a socket to it

[Sailman 1,291]

On 8/6/2024 at 10:42 AM, Wvtroutbum81 said:

I just cut the end off a old chisel and welded a socket to it

I assume you want a socket that fits the shank of the right punch? Sounds like that would be a 7/32 punch for a C-160 steering wheel roll pin. Correct me if I am wrong. Thanks.

Edited August 7 by Sailman

[ebinmaine 67,496]

8 minutes ago, Sailman said:

I assume you want a socket that fits the shank of the right punch? Sounds like that would be a 7/32 punch for a C-160 steering wheel roll pin. Correct me if I am wrong. Thanks.

 

I used a 1/4 

[Sailman 1,291]

Looks like this would be a good solution instead of fabricating socket / pin punch?

https://www.amazon.com/Mayhew-Tools-31950HT-Pneumatic-Punch/dp/B07K7B4NZC?th=1

I do want the roll pin punch and NOT the drift pin punch correct?

1/4 inch good to go? One of the wheels is off a C-160 other is my C-120. I assume they are the same?

Its made in USA so should be good steel.

Edited August 7 by Sailman

[ebinmaine 67,496]

12 minutes ago, Sailman said:

Looks like this would be a good solution instead of fabricating socket / pin punch?

https://www.amazon.com/Mayhew-Tools-31950HT-Pneumatic-Punch/dp/B07K7B4NZC?th=1

I do want the roll pin punch and NOT the drift pin punch correct?

1/4 inch good to go? One of the wheels is off a C-160 other is my C-120. I assume they are the same?

Its made in USA so should be good steel.

 

I removed a wheel from a 1974 C160 and a 1984 GT1100 with the same 1/4" roll pin punch. 

The pins I ordered are 1/4" diameter. 

Seems good.