Jump to content
Sparky

Magnum swap

Recommended Posts

Sparky

  So today is the day I start the Magnun-Magnum swap. 
  Bought a non-running/condition unknown 414 with a Mag14. After quite a few hours and some parts I finally have it running good and it seems to be trusty. Carb has been off and on and cleaned and cleaned…3amp charging system was “dead” so swapped in the HD 15amp setup. New head gasket and ignition etc…you guys know the drill. 
  I bought this as a replacement engine for the Magnum 10 in my GT-1600 plow rig. The 10 is still good but I was thinking in a few years it might be time for an upgrade/repower…and I happened to stumble upon the 414 a few years too soon :lol: ! 
  Pretty straightforward swap, shouldn’t require any wiring or fabrication or drilling of the frame :handgestures-thumbupright:


IMG_4458.jpeg

 

IMG_4459.jpeg

 

IMG_4460.jpeg

IMG_4463.jpeg

 

IMG_4467.jpeg

 

IMG_4468.jpeg

 

IMG_4469.jpeg

 

  • Like 3
  • Excellent 1

Share this post


Link to post
Share on other sites
 
squonk

Look at all that room in the shop! You even have room for my chair!! I'll be right over! :lol:

 

IMG_4463.jpeg

  • Haha 4

Share this post


Link to post
Share on other sites
 
ebinmaine

Niiiiice.  

 

Even swap!

  • Like 1

Share this post


Link to post
Share on other sites
 
Sparky

Done!! 
  All installed and running! 
A 16 Magnum was my dream motor, would have matched the hood decals :lol:. But this 14 will be just fine.

 

IMG_4476.jpeg

 

IMG_4475.jpeg

 

IMG_4471.jpeg

 

IMG_4472.jpeg

 

 

 

  • Like 4
  • Excellent 1

Share this post


Link to post
Share on other sites
 
Sparky

Probably going to paint the 4 wheels before the weights go back on. 
 

IMG_4477.jpeg

 

IMG_4478.jpeg

 

IMG_4479.jpeg

 

IMG_4480.jpeg

 

 

  • Like 2
  • Excellent 2

Share this post


Link to post
Share on other sites
 
ebinmaine
26 minutes ago, Sparky said:

All installed and running! 
A 16 Magnum was my dream motor, would have matched the hood decals

 

Now ya know....

You could have that 14 bored up to a 16 and get some new decals. 

 

:lol:

Share this post


Link to post
Share on other sites
 
Handy Don

I don’t see the new reins for holding back all those horses if they try to run away!

  • Haha 4

Share this post


Link to post
Share on other sites
 
953 nut
4 hours ago, Sparky said:

paint the 4 wheels before the weights go back on.

Get it looking good for the 2025 Big Show,       :handgestures-thumbupright:      Feature Tractor you know.            :text-coolphotos:

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...