Keaton 426 #1 Posted July 24 I am working on this springfeild I got and I was working it and wanted to try looking at the deck and so I started looking at it and took the input shaft off and the tube that hooks into the tractor, then I took the main spindall off and tired to free it up and I was wondering if anyone had a manual for a 1964 springfeild 64a or 25 model, thanks- Keaton Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,012 #2 Posted July 24 We have some manuals from 1967 after they were acquired by Toro. May be something in them that was a carryover. 2 pages of search results https://www.wheelhorseforum.com/search/?q=springfield&quick=1&type=downloads_file Share this post Link to post Share on other sites
Keaton 426 #3 Posted July 24 I found the part number now I need the part it is a 7-0774 part number, it is a deck spindall housing Share this post Link to post Share on other sites
Keaton 426 #4 Posted July 24 I got mine moving now, it was stuck, idk if I can use it agin, it is cracked on a few spots I may need it welded. I cannot find one online for sale I looked for toro and springfeild branded ones Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,012 #5 Posted July 24 The two parts lists at the bottom contain that spindle https://www.partstree.com/parts/toro-7-0774/ Share this post Link to post Share on other sites
Keaton 426 #6 Posted July 24 thank you @gwest_ca I found thoes when I was looking around, that's where I got the number from 1 Share this post Link to post Share on other sites
