Toolmanbill 32 #1 Posted July 21 Can anyone tell me where this brake spring attaches to?mine must have broken and I can’t tell where it attaches to.listed on the drawing is part #40. Share this post Link to post Share on other sites
peter lena 8,716 #2 Posted July 21 @Toolmanbill look carefully at the lower end of , each connection , probably , rust or grass packed small hole , another perfect opportunity , is to LUBRICATE ANY / ALL LINKGE / MOVEMENT POINTS ! like a penetrating oil first / make the rust run out , then an aerosol spray ,extension tube RED GREASE , lots to learn in related linkage areas , should be easy to move , pete Share this post Link to post Share on other sites
rmaynard 15,580 #3 Posted July 21 (edited) 1 hour ago, Toolmanbill said: Can anyone tell me where this brake spring attaches to?mine must have broken and I can’t tell where it attaches to.listed on the drawing is part #40. Spring attaches from the small hole in ratchet (23) to a small hole at the bottom of the dash tower. This picture is from a B-100 8-speed, looking down through the shift pattern plate. You didn't specify what model you are working with, but this should give you some frame of reference. Edited July 21 by rmaynard 2 Share this post Link to post Share on other sites
Toolmanbill 32 #4 Posted July 23 Thanks for the info guys.much appriciated Share this post Link to post Share on other sites
