gt14rider 812 #1 Posted July 7, 2024 Hi all, I am replacing the shaft on a parking paw and did not measure the roll pin hole (see picture). Can anyone help me out. Thanks Share this post Link to post Share on other sites
ebinmaine 69,687 #2 Posted July 7, 2024 Measurement is from the edge of the hole furthest from the hoop. Hole diameter. 1/8 1 Share this post Link to post Share on other sites
gt14rider 812 #3 Posted July 7, 2024 Thank you, have a great rest of the weekend. One step forward and two back. 1 Share this post Link to post Share on other sites
daveoman1966 3,768 #4 Posted July 7, 2024 Looked at all my pics but don't have the exact spacing for the PARKING PAWL (not paw) that you ask for. However, here are a couple pics that may help with the hole location: Maybe you can buy new....it is OEM # 5966 for the welded style PARLKING PAWL like yours. 3 1 Share this post Link to post Share on other sites
gt14rider 812 #5 Posted July 7, 2024 Thanks dave, all set the measurement EB gave me will work. 1 Share this post Link to post Share on other sites
gt14rider 812 #6 Posted July 9, 2024 Thanks EB, all set. 1 Share this post Link to post Share on other sites
