Cape Codder 5 #1 Posted July 6 (edited) I had my original carb cleaned last week on my WH 310-8. Running great but was told the throtlle mechanism is worn and I will need a new carb in the future. What are people using as a replacement. Edited July 6 by Cape Codder typo Share this post Link to post Share on other sites
ebinmaine 67,810 #2 Posted July 6 What part of the mechanism is ACTUALLY worn? Some carbs can be repaired with a washer. Linkage can be replaced. Pics or videos would help a lot. Share this post Link to post Share on other sites
squonk 41,200 #3 Posted July 6 Brian and his Dad have some nice carbs. Share this post Link to post Share on other sites
ri702bill 8,407 #4 Posted July 6 Just a word of caution on "Offshore" carbs. Do your homework first - SOME are similar to the OE parts, but an OE rebuild kit does NOT fit them.... and OE throttle & choke parts are not the same... Share this post Link to post Share on other sites
ebinmaine 67,810 #5 Posted July 6 1 hour ago, squonk said: Brian and his Dad have some nice carbs. If the OE carb can't be rebuilt this is the way to go! Share this post Link to post Share on other sites
Cape Codder 5 #6 Posted July 7 20 hours ago, ebinmaine said: What part of the mechanism is ACTUALLY worn? Some carbs can be repaired with a washer. Linkage can be replaced. Pics or videos would help a lot. I wilt take a pic and post. Thanks 1 Share this post Link to post Share on other sites
