cafoose 3,355 #1 Posted July 1 Just got done installing my new seat I got at the big show from Brian at K & B Horse Parts @76c12091520h I had to drill new holes in the old mounting brackets for front to rear spacing. The dimples in the brackets were perfectly spaced at 7 inches like my 520 so all I did was drill out the dimples then it fit perfectly Brian did tell me the spacing was off so I expected to have to modify something. 3 8 1 Share this post Link to post Share on other sites
peter lena 8,658 #2 Posted July 1 @cafoose , been using aftermarket seat springs for years , some of the set ups I use , never held up by a simple switch / swap . best springs and rubber mount are for a sifter spring plate , very strong bolt on rubber slide point . pete 1 1 Share this post Link to post Share on other sites
Retired Wrencher 5,469 #3 Posted July 3 I have been buying original parts from Brian for a while now. He does a great job keep these old tractors going. We should thank our vendors who keep them running. 5 Share this post Link to post Share on other sites