Keaton 441 #1 Posted June 28 I was working on my RJ engine taking, the tins and stuff off to clean the outside of the block. and I went to take the govner apart and dropped the govner arm in the engine, so I decided since I nad to take the cam out to get to that, it was all apart and, I guess a rebuild would not hurt it. what would be the best rebuild kit to buy, I think the crank and rod are fine, but before it ran and not make noise, I found one from lil red barn on eBay, the bearings are fine on my engine, I think I need gaskets and the seals that go in the bearing plate and block, I don't think I am allowed to put eBay links but I was going to get the one with a piston, seals and rings, anyone got better advice, and I was going to use @VinsRJ grab bag Kohler videos to help me rebuild right. Share this post Link to post Share on other sites
mflowers 85 #2 Posted July 4 Have you looked at iSaveTractors? 1 Share this post Link to post Share on other sites
953 nut 55,515 #3 Posted July 4 https://isavetractors.com/gasket-oil-seal-set-k90-k91/ Share this post Link to post Share on other sites