John2189 454 #1 Posted June 25 I need a head, the spark plug hole is stripped, installed helicoil, but it didn’t hold tried to post in wanted section, but nowhere to start new post 1 Share this post Link to post Share on other sites
ebinmaine 67,768 #2 Posted June 25 When you go to the wanted section scroll down to the bottom and you should see where to add a new post 1 Share this post Link to post Share on other sites
Ed Kennell 38,330 #3 Posted June 25 John, you can actually click on CREATE at the upper right of the home page. Then scroll down and click on CLASSIFIEDS IN CLASSIFIED Click on WANTED then CONTINUE 2 Share this post Link to post Share on other sites
John2189 454 #4 Posted June 25 Thanks Ed and Eric. Id have never thought to go to the bottom of the page 1 Share this post Link to post Share on other sites
Wild Bill 633 847 #5 Posted June 26 @John2189, You may want to consider using an E-Z Lok threaded insert. The M14-1.25 threaded insert has a 3/4-16 external thread. P/Ns are 3209-1406, (0.328" Lg), 3209-1408 (0.453" Lg) and 3209-1412 (0.703" Lg). 1 Share this post Link to post Share on other sites
John2189 454 #6 Posted June 26 8 minutes ago, Wild Bill 633 said: @John2189, You may want to consider using an E-Z Lok threaded insert. The M14-1.25 threaded insert has a 3/4-16 external thread. P/Ns are 3209-1406, (0.328" Lg), 3209-1408 (0.453" Lg) and 3209-1412 (0.703" Lg). Thanks Bill. 1 Share this post Link to post Share on other sites
Wild Bill 633 847 #7 Posted June 26 @John2189Please keep us informed how the E-Z Lok works out. 1 Share this post Link to post Share on other sites
John2189 454 #8 Posted June 27 2 hours ago, Wild Bill 633 said: @John2189Please keep us informed how the E-Z Lok works out. Will do 1 Share this post Link to post Share on other sites
Mark siebenaler 88 #9 Posted June 30 On 6/26/2024 at 8:14 PM, John2189 said: Will do Good luck Share this post Link to post Share on other sites
