mflowers 85 #1 Posted June 24 (edited) I have a few parts boxed up with the C-160 I took apart 15 years ago that I can’t identify. They may or may not belong to this tractor. Any help would be greatly appreciated! Here is the first one. It has a roll pin so I assume it mounts on a shaft and serves as a bearing, but darned if I can find where. Edited June 24 by mflowers 1 Share this post Link to post Share on other sites
daveoman1966 3,751 #2 Posted June 24 I've rebuilt a C-160 auto from ground up...don't recognize that part at all... 1 Share this post Link to post Share on other sites
ebinmaine 67,497 #3 Posted June 24 5 hours ago, daveoman1966 said: I've rebuilt a C-160 auto from ground up...don't recognize that part at all... We've restored both manual and automatic. Doesn't look familiar. 1 Share this post Link to post Share on other sites
ebinmaine 67,497 #4 Posted June 24 Google search using Roberts rx174 shows it's a snowblower bearing of some sort. 3 Share this post Link to post Share on other sites
mflowers 85 #5 Posted June 24 (edited) I think you’re on to something, I have the snow blower for this machine in the shed and plan to start on it once the tractor is done. Thanks! Edited June 24 by mflowers 3 Share this post Link to post Share on other sites
Handy Don 12,227 #6 Posted June 24 Yep. the rounded outer race of your bearing is held tightly captive between two faces of a bolted-together support. I’ve seen these for attaching snowblower jack shafts. 1 Share this post Link to post Share on other sites
mflowers 85 #7 Posted June 24 Found this on another post. This will come in handy when it’s time to start that project! As always, I appreciate the help here! 2 Share this post Link to post Share on other sites
