Wvtroutbum81 186 #1 Posted June 24 Thank you @JoeM for selling me this blade! I have it installed, now just need it to quit raining. Build quality is top notch. 8 2 Share this post Link to post Share on other sites
JoeM 7,874 #2 Posted June 24 Thanks! Looks good! Nice machine. 1 Share this post Link to post Share on other sites
sqrlgtr 552 #3 Posted June 25 I would like to see a video of one of these belly mount blades working. I posted same thing in thread (grader build) above.... Maybe someone will take the hint ha ha... Share this post Link to post Share on other sites
cafoose 3,355 #4 Posted June 26 5 hours ago, sqrlgtr said: I would like to see a video of one of these belly mount blades working. I posted same thing in thread (grader build) above.... Maybe someone will take the hint ha ha... I have a mid mount grader blade but haven't tried it yet. When I finally get back home after the Big Show trip you can see it live when I get around to setting it up. I'm at my sister's in VA at the moment and may be there for a few days before coming home. 1 1 Share this post Link to post Share on other sites
Lee1977 6,666 #5 Posted June 26 (edited) Don't have a video, this is a home built grader blade also. Was grading to get the water to go to a drain on the other side of that tree. I'm not tall and used my foot on the lift lever to hold it down. I also use a single ripper on the rear to loosen up the area first. I built out of some scrap angles I had and it's too short, but I built a longer clevis hitch and it works a lot better. here is the longer clevis hitch. Edited June 26 by Lee1977 1 Share this post Link to post Share on other sites
