C-85 681 #1 Posted June 19 I'm in the process of rebuilding a C145A and its muffler and I was just going to weld the crack in the top of it where the pipe goes into it, but when I took it off I heard parts/pieces clanking around inside of it! I carefully cut it apart hoping i'd find something simple in it and just clear it out, but its whole innards are gone! Then I was going to weld it back together, but now I think it is time to replace it, and I'm hoping you folks will have some suggestions . I'll be interested in options and will probably be most interested in keeping it as close to stock as possible. C-85 1 Share this post Link to post Share on other sites
ebinmaine 67,498 #2 Posted June 19 If you wanna stay stock those original Nelsons do pop up used. Otherwise I've been having good luck with aftermarket Gravely Mufflers. 2 Share this post Link to post Share on other sites
WHX?? 48,815 #3 Posted June 19 Pic? I may have one. You see those bad links EB? 2 Share this post Link to post Share on other sites
Handy Don 12,227 #4 Posted June 19 30 minutes ago, C-85 said: I'm in the process of rebuilding a C145A Not sure what format images you uploaded, but they are not visible to me 2 Share this post Link to post Share on other sites
WHX?? 48,815 #5 Posted June 19 So I'm not crazy Don... 2 Share this post Link to post Share on other sites
Tractorhead 9,064 #6 Posted June 19 10 minutes ago, WHX?? said: So I'm not crazy Don... In case of that - .... no! 😂😂 No picts 2 Share this post Link to post Share on other sites
wallfish 16,999 #7 Posted June 19 24 minutes ago, WHX?? said: So I'm not crazy Don... Hold on a minute. Those are only botched links. Nothing to do with that! LOL 4 Share this post Link to post Share on other sites
ebinmaine 67,498 #8 Posted June 19 6 hours ago, WHX?? said: So I'm not crazy Don... Ehhhhh..... 1 2 Share this post Link to post Share on other sites
SylvanLakeWH 25,558 #9 Posted June 19 9 hours ago, WHX?? said: So I'm not crazy Don... Typed in "is @WHX?? crazy?" on AI system and got this response: "Has not maintained red name supporter status on Redsquare. So yes Virginia, whxx is crazy, and will be subject to a mandatory 1 month of only using, driving, repairing or ruining 's with Techy's... No Kohlers allowed." 1 3 Share this post Link to post Share on other sites
ebinmaine 67,498 #10 Posted June 19 40 minutes ago, SylvanLakeWH said: only using, driving, repairing or ruining 's with Techy's Ouch. 3 Share this post Link to post Share on other sites
WHX?? 48,815 #11 Posted June 19 (edited) Now... you aren't helping him find a muffler! Edited June 19 by WHX?? 2 1 Share this post Link to post Share on other sites
rjg854 11,361 #12 Posted June 19 10 hours ago, WHX?? said: So I'm not crazy ... That's up for debate Eating mac and cheese off the ground with a pooper scooper tends to make one wonder 5 Share this post Link to post Share on other sites
peter lena 8,627 #13 Posted June 19 @C-85 make one out of 316 S/S piping , look up the schematic build for measurements . need about a 4" ID of piping , and perforated S/S for baffling , tig weld would be perfect . weld on isolation mount points . local scrap yard probably has a stash of stainless . that 316 grade of stainless , laughs at just about anything , corrosive . pete 1 Share this post Link to post Share on other sites
C-85 681 #14 Posted June 19 Hi All, Thanks for the feedback! I didn't realize that my pictures couldn't be seen, so I'm curious, no one could see them or none of you? ! I'm far from a tech person and hope to learn how to post pictures better! I had taken pictures of what's left of my muffler on my phone then emailed them to myself and then copied and pasted the pictures to this. C-85 Share this post Link to post Share on other sites
