wheel bearing for c-101

[stegs 325]

anybody know the correct part number for a front wheel bearing on a c-101

 

I want to replace both front bearings, but i dont know if its the same size as a 416H i did a while back or if its a different size

[peter lena 8,608]

@stegs in addition to replacing bearings / also repacking them  with a hi stress grease , pick up some steel washers , to shim up the  LATERAL SIDE PLAY SHUCK . the combo of eliminating the side play wear , and better lube , has made my , wheel bearing  issues go away , also a good time to raise suspension , and re grease spindle axel points , also have vinyl capped the top of spindle discharge point . what ever bearings  you replace , look for a possible wide rubber side shield , thats easily removable , for clean out and hi temp / stress  replacement . the difference between original and improved bearing , makes this a non issue . easy to do , pete 

[Ed Kennell 38,128]

Amazon.com: XiKe 10 Pcs Flanged Ball Bearings ID 3/4" x OD 1-3/8", Applicable Lawn Mower, Wheelbarrows, Carts & Hand Trucks Wheel, Replacement 532009040, AM118315, AM127304, 10513, 251210 Etc. : Patio, Lawn & Garden

[peter lena 8,608]

@Ed Kennell  what's not to like ?  great pricing , wide rubber side shields ,  local H/W  store pullout drawer section for  washers / shims , lucas green grease repack , solid smooth , pete 

[Ed Kennell 38,128]

Yep, Sealed bearings.  Lift off the rubber seal, clean and regrease and shim tight per Petes post.      

I have them in use for years with no problems.        Do not put grease in the hub zerk.     BTW, You need 4 bearings to do one tractor.

[Handy Don 12,210]

17 minutes ago, Ed Kennell said:

 BTW, You need 4 bearings to do one tractor.