Pullstart 62,877 #1 Posted June 15 @Sailman had a tree come down on his tractor shed, damaging his C120. Is yours a hydro or gear drive? I have a hood and belt guard off a C-101 8 speed, and the same 2 spoke steering wheel as he has. Would my hood and belt guard work for him? Share this post Link to post Share on other sites
Sailman 1,291 #2 Posted June 15 (edited) My C-120 is a Hydro. I will take a picture of my belt guard today. See if its attached to the footboard or bolted. Edited June 15 by Sailman Share this post Link to post Share on other sites
ebinmaine 67,497 #3 Posted June 15 My question would be about the angle of the hood when comparing horizontal top to the vertical part at the front. I'm thinking some models of the 1970 and up had a hood that was a slightly different angle....?? Share this post Link to post Share on other sites
c-series don 8,707 #4 Posted June 15 I have both, I’ll have to go look and report back! 1 1 Share this post Link to post Share on other sites
ebinmaine 67,497 #5 Posted June 15 1 minute ago, c-series don said: I have both, I’ll have to go look and report back! I was hoping you'd chime in! My C121 is the one we built for my parents. That's 170 miles from my other older C Series. 1 Share this post Link to post Share on other sites
Pullstart 62,877 #6 Posted June 15 1 hour ago, Sailman said: My C-120 is a Hydro. I will take a picture of my belt guard today. See if its attached to the footboard or bolted. I want to say this was from my C-160 hydro. look familiar? 1 Share this post Link to post Share on other sites
Lee1977 6,659 #7 Posted June 16 That will fit a C-120 Hydro. C-!2! is short in the back, cut off before the hole. Share this post Link to post Share on other sites
