Lane Ranger 10,968 #1 Posted June 13 I have had this wire belt guide ( I think) for about ten years or more! Not sure what it fits or goes to but I believe it is Wheel Horse! Free at the show for someone who needs it and can tell me what it is used on! 1 1 Share this post Link to post Share on other sites
squonk 41,117 #2 Posted June 13 I'm putting an K91 on a 551 at the show and am bringing every wire belt guide I have in my box of parts to try to get it running and driving before going home. If no one guesses it I take it for a bottle of water! 3 1 Share this post Link to post Share on other sites
wallfish 16,999 #3 Posted June 13 3 hours ago, squonk said: I'm putting an K91 on a 551 at the show and am bringing every wire belt guide I have in my box of parts to try to get it running and driving before going home. If no one guesses it I take it for a bottle of water! Ooooo, another project going on! I'll have some steel rod and bolt cutters to make some wire belt guide finger thingys if need be. Some of those nut roasters can take a while to get them to work right, while others just work great with minimal effort. No belt guard Mike? 1/2" x 30 belt if all the pulleys are original sizes 2 2 Share this post Link to post Share on other sites
squonk 41,117 #4 Posted June 13 1 minute ago, wallfish said: Ooooo, another project going on! I'll have some steel rod and bolt cutters to make some wire belt guide finger thingys if need be. Some of those nut roasters can take a while to get them to work right, while others just work great with minimal effort. No belt guard Mike? 1/2" x 30 belt if all the pulleys are original sizes I have a box of belts, fuel line, nuts, bolts, exhaust parts, throttle cables, oil, funnel wire ends, tool bag, mat to lay on and a rental pulley off of an 854. Hope to find the right pulley there. I modified the hood stand to clear the Kohler governor pin. I have the belt guard but I'm going to have to fab some kind of rear mount so I'll probably do that when I get back home. 1 Share this post Link to post Share on other sites
wallfish 16,999 #5 Posted June 13 2 minutes ago, squonk said: I have the belt guard but I'm going to have to fab some kind of rear mount so I'll probably do that when I get back home. It's just a piece of tube and a long bolt. 1/2" copper pipe works well. I might have some steel tube. We can get it working there if you want. Share this post Link to post Share on other sites
squonk 41,117 #6 Posted June 13 37 minutes ago, wallfish said: It's just a piece of tube and a long bolt. 1/2" copper pipe works well. I might have some steel tube. We can get it working there if you want. I'll bring the guard I have. It may not be the correct one. The rear hole doesn't match up to anything on the trans to bolt on. It's a 2 piece trans. 2 Share this post Link to post Share on other sites
Retired Wrencher 5,455 #7 Posted June 14 (edited) I hope who attend the big show this year have a great time meet some old friends and have some good stories to tell. And most of all ENJOY THE RIDE. Edited June 14 by Retired Wrencher 2 Share this post Link to post Share on other sites
Treepep 564 #8 Posted June 14 20 hours ago, Lane Ranger said: I have had this wire belt guide ( I think) for about ten years or more! Not sure what it fits or goes to but I believe it is Wheel Horse! Free at the show for someone who needs it and can tell me what it is used on! Left handed back scratcher 1 Share this post Link to post Share on other sites
.thumb.JPG.1b2a1a39cdcedb1e001571713350b32c.JPG)