Would This Snowblower Work on a C-175

[Foxer414 0]

I have a C-175 and I found this Snowblower on marketplace. I was wondering if it would work on my tractor? From the pictures on the internet, it looks the same as the ones I see in the C-175s. I asked the guy for the serial #, but haven't gotten it yet.

[gwest_ca-(File Mod) 11,040]

Looks like a 1975-1980 model but will fit the C-175

[ebinmaine 67,415]

[Foxer414 0]

1 hour ago, gwest_ca said:

Looks like a 1975-1980 model but will fit the C-175

What's the difference between this model and the ones that came with the C-175s?

[c-series don 8,687]

I don’t think there’s any? I think the tall shoot model didn’t start until the late eighties, and then there’s the two stage model which is a totally different animal.

[wallfish 16,994]

30 minutes ago, Foxer414 said:

What's the difference between this model and the ones that came with the C-175s?

That one has wheels and later models used skid shoes.

Yes, it will fit and work on your 175

[Blasterdad 2,692]

34 minutes ago, Foxer414 said:

What's the difference between this model and the ones that came with the C-175s?

None were made specically for a C-175, they fit all C series, & 300,400,500 series. only difference is the year of the blower, the one you have pictured is an older one with steel wheels & height adjustment lever, newer models just had skids on the bottom & a nylon chute base  like this... (both good units)

older one below

Edited June 11 by Blasterdad

[gwest_ca-(File Mod) 11,040]

Front quick hitch introduced in 1973. Snowthrower rear frame has a 5/8" diameter round bar.

1973-74 model 6-6212 plus 6-9113

1974 model 6-6213 - (First model to include 8-0221 extensions without the front straight return - just a flat plate)

1975 model 6-6214 - (First model to include 8-0221 [103552 replaced by 93-1617 and 93-1617-01] side extensions with the front straight return. First model to have a cable spool on chute rotating crank) Chute crank support decal 104461.

1976 model 6-6215 ------ Chute crank support decal 104461. This one -

1976 model 66-42ST01 - Chute crank support decal 104461. and this one are likely identical. The model number format changed.

1977 model 76-42ST01 - Chute crank support decal 104461. This one

1978 model 86-42ST01 - Chute crank support decal 104461. and this one

1979 model 96-42ST01 - Chute crank support decal 104461. and this one may be all the same. They started using a different model number for each model year.

1980 model 06-42ST01 - (Last 42" model to use 4 grooved rollers for the chute)

1981-82 model 06-42ST02 - (First model to use plastic collar for the chute but was a retrofit for older models. Last model to use wheels)

1983 model 06-42ST03 - (First model to use skids)

1984-87 model 06-42ST04 - (Last model to use a 3/4" diameter driveshaft)

1987-89 model 06-42ST05 - (First model to use a 7/8" diameter driveshaft)

1990 model 06-42ST06 - (Last model to use a cable to turn the chute)

1991-93 model 06-42ST07 - (First model with tall chute retained by 3 individual grooved retainers)

1993-2001 model 79360 - (2001 and earlier will fit 2002-2007 with kit 105-1503) (1994 first year for replaceable blower housing scraper bar)

2002-2007 model 79362

[ebinmaine 67,415]

7 hours ago, gwest_ca said:

Snowthrower

 

That's very interesting.  

I've never seen that broken down.  

 

[Blasterdad 2,692]

2 hours ago, ebinmaine said:

 

That's very interesting.  

I've never seen that broken down.  

 

I've seen that before but I had no idea where to find it, @gwest_ca is priceless   as always! Thanks, I'm going to save this one.