Fordiesel69 263 #1 Posted May 30 I made a post years ago and now cannot find it. Have a 312-8 without the dial a matic knob and the entire lift bracket underneath fell out of the frame where it hinges / pivots. The chain is still attached to the bar keeping it from completely falling on the ground. I cannot figure out how to re-insert it into the frame. Any ideas? 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,040 #2 Posted May 30 I think you need to place the rod in the left hole with the bushing and push it far enough that the right side can be placed in the right hole. Slide the bar to the right and installed the e-ring retainer on the left side of the rod. 6 3 Share this post Link to post Share on other sites
Handy Don 12,212 #3 Posted May 30 Nicely explained, Garry! 4 Share this post Link to post Share on other sites
