ebinmaine 67,498 #1 Posted May 30 Just a curiosity thing here... On my 1971 Bronco 14 there are two different side steps. See the pictures below. One has holes. The other does not. In my possession right now there are seven tractors built either 1974 or 1975. All of those have the straight flat step. No holes... Except one. Interestingly, it has the opposite side as the Bronco so at some point or another I'll swap them around. Doesn't much matter one way or the other but they just got me wondering if there was a certain year range, model, package, or whatever, that had holes in the steps on purpose. Share this post Link to post Share on other sites
Jon Paulsen 290 #2 Posted May 30 416-8 #31160804 has one hole near the rear on both sides, then a square hole inboard center on the left side. Right side has what looks like the head of a carriage bolt inboard center; likely a square hole there. 1 Share this post Link to post Share on other sites
Lee1977 6,659 #3 Posted May 30 (edited) The raised ponched holes went away some where between the named and early C-series.. Don't know if it was a year model change just happen mid year.Your Bronco should have them. Edited May 30 by Lee1977 1 Share this post Link to post Share on other sites
Maz91 202 #4 Posted June 23 Long time no talk, stranger! My raider is ‘71 and on both sides the foot rests have holes. I also just found a YouTube video of a ‘72 and the footrests also have them. 1 Share this post Link to post Share on other sites
Retired Wrencher 5,455 #5 Posted June 23 Eric nice shop you have. Looks to be lots room to have tools and MORE TRACTORS. 2 1 Share this post Link to post Share on other sites
